Member Since: 20 Nov 2019
Location: Blue springs
Posts: 1
Air suspension
Just got my rear air springs changed on 2006 lr3 hse and when trying to calibrate..its saying cross link valve actuation error
Help ! What could this be?
20th Nov 2019 12:51 am
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4655
Ideally you need the diagnostic codes to pinpoint the problem.
However, given the maintenance you have had carried out its very possible the valve block connectors are not replaced correctly as it is here that the cross link lives!!
Unplug the rear valve block connectors again and check carefully the plug and its wiring, The valve block is located on the forward face of the n/s rear turret
Its much less likely, but also possible is one of the height sensors you disconnected has either not been reconnected correctly or, one of the connectors/wiring is perished. Check again as above!yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
