Iona Disko
Member Since: 04 Jul 2008
Location: NE
Posts: 286
|
Anyone carried out the steering knock TSB? |
|
Has anyone carried out the repairs necessary to remove the annoying steering knock as per below?
If so I'd be interested to know how difficult it is to get the steering component out and replaced.
Models: LA - Discovery 3
LS - Range Rover Sport
Title: FAQ 22241 - Steering light knock over bumps.
Engineer Name: Townsend, Ken
Last Modified: 24-APR-06
Category: Chassis
Symptom: 303000 Steering/Handling
Content: User will report light knock over bumps. Some will show slight free play in steering.
Cause is LOWER steering shaft (Under bonnet) NOT the steering rack.
With vehicle static engine off check for free play in steering aprox +/- 3 degrees, with gentle input.
Also some vehicles may exhibit a light knock on uneven surfaces between 10 to 15 mph.
If the shaft is the cause please use new part number QMN500240 (RHD) or QMN500250 (LHD) to repair as this has improved characteristics for noise. Part was introduced to production at L319 - LA390436
L320 - LS956379. If shaft does not resolve knocking noise please submit an EPQR and contact dealer technical support. _____________
Club KW (Knackered Winch)
Club FHS (Firestarting heated seat)
Club Airbag light
Club Bleeping PDC
Club Faded orange
Club Dents
Club 48 hour Noisy Stainless Exhaust
Club Permagrin
|
19th Mar 2009 7:09 pm |
|
|
disco_doozle
Member Since: 03 Nov 2007
Location: Bree
Posts: 447
|
Mine went in for this a least four times....before out of warranty
Changed bits and things.....some times resolved, after a while it came back.
now last time before warranty expires.....no, we can not do anything more then we did, sorry, Land Rover tells us that is is completely normal.
My 98 Disco 300tdi feels better in handling off-road then the Disco 3.....
So it will stay this way..... Disco 3 TDV6 Aut. 7 seat, Zambezi silver, Privacy glass, Rosen A9 DVD, Tow-kit, K&N airfilter, Frontrunner Windcheetah + 4xHella Comet 550, tailgate ladder, 5 breaklights , Performance BB6 17" + Duratracs 256/70R17, RLD Skid-plate, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal,
|
20th Mar 2009 10:09 am |
|
|
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
|
Not too bad a job, to replace the lower arm takes about 20 mins once the wheels off, the upper one takes a bit longer as the upper rubber gaiter is a to get back in properly don't forget to get new bolts and a new nut
|
20th Mar 2009 10:12 am |
|
|