Member Since: 29 Oct 2009
Location: norfolk
Posts: 472
best remap
hi i have had several remaps ect done in the past, but am wondering what you guys on here are useing, i am thinking about an imap (its the same type of thing as the evolve switch) as you can have a power,econemy and a standard map on it and switch between the 3
any feedback on your remaps would help, regards richardRichard
club none owner
30th Oct 2009 8:38 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Hard Hat on INCOMING
30th Oct 2009 8:39 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
oddboy, sorry to be flippant. Right what you need to decide is what you want out of a REMAP, economy? performance?, permanent?, or removable.
My only recommendation is to try before you buy, plenty of guys on the forum that have done it, including me. More than welcome to try mine if in the area
30th Oct 2009 8:42 pm
TazDaz
Member Since: 07 May 2007
Location: South East Essex
Posts: 2858
have alook at the site sponsors
30th Oct 2009 8:42 pm
sacimiddx
Member Since: 09 Mar 2007
Location: hants
Posts: 2143
Member Since: 18 Apr 2008
Location: away
Posts: 10723
ok, HARD HAT ON NOW
30th Oct 2009 8:44 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72790
TorqTune, Turbo Chip, BAS or JE, my advice would be stick to one of the well tried remaps. I run TT and TC, well happy with the remapping and service from these 2, others say same about BAS. Choices, choices - as long as you end up with a big
30th Oct 2009 8:57 pm
oddboy
Member Since: 29 Oct 2009
Location: norfolk
Posts: 472
the switchable box bell show is the very same as imap from vantuner he did my 174ps vw transporter, i like them i do have a sprinter "superchipped" but think it might be better to have removeable on a disco, the imap is cheaper than the bell/evolve box (400) i have also used bluefin before but its not listed for disco, i have a bit of time to make my mind up as i dont pick up disco till tuesdayRichard
club none owner
30th Oct 2009 8:59 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Personally I WOULD stick with the one's on the forum, I cannot comment of those you mentioned, only on 3 of the suggestions DSL said, I tried them and chose what I found my suitability.
Forum Sponsor tuners will help you decide, not just to take your money but the ongoing support and trouble shooting, with the knowledge of marrying their tune to the D3.
But he who spends his money, makes his decisions.
30th Oct 2009 9:03 pm
oddboy
Member Since: 29 Oct 2009
Location: norfolk
Posts: 472
has anyone on here had evolve in luton tune their disco as although i live in norfolk i work in harpenden hertsRichard
club none owner
30th Oct 2009 9:06 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
TorqTune will come to you - pm 10forCash
BAS does his through email via a box he sends to you
The others are branch visits
30th Oct 2009 9:07 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
Wrong
Turbochip will also come to you Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
30th Oct 2009 9:09 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
DD, thats why I didnt mention as never tried them.....But its good news for a probable purchaser.
30th Oct 2009 9:12 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72790
Agreed, did 4 me reinstalling after new turbo.
30th Oct 2009 9:12 pm
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
Without having to ware a hard hat lol, ill try and advise.
Be carefull of Martin @ vantuner , he USED to be a dealer of mine untill he started to rip customers of with stolen remap files and cracked ilegal software.
RE my BAS box, i agree that i may not be the cheapest on the market but as many of the forum members will tell you my aftersales support is 110% nearly 24/7 of the time.
Id like to think that the support i give and knowlage of the engine along with in-house mapping makes my tool well worth the price charged.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Hard Hat on 
