Jetlag
Member Since: 11 Mar 2012
Location: Johannesburg
Posts: 205
  
|
Hi guys,
I am wanting to fit a BlackVue camera into my D4 but want to see where the rest of you installed your BlackVue cameras?
The reason for my asking is because the light sensor is just beneath the mirror when I would normally have installed the BV camera. Disco 4 SDV6 HSE with Compomotives, BFG 265/65R18s, BigCountry drawer system, Melvill & Moon covers, NL 52L fridge, FR Spare Wheel Carrier, FR Roof Rack, Tenco RTT, FR 50" LED Bar, dual spots, Lift Rods, Mantec Snorkel, C-TEK Dual batt system, 270 Ostrichwing, Maxtrax, Icom ID-5100, Icom ID-51 as secondary, IIDtool BT
Follow my adventures on Instagram @XpeditionAfrica
|
 6th Aug 2014 1:13 pm |
|
|
Brian_DL13
Member Since: 25 Aug 2013
Location: Teesdale
Posts: 1418
 
|
Just to the left of the mirror, stuck just inside the black bit on the screen.
|
| 6th Aug 2014 1:28 pm |
|
|
Gareth
Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26704
|
Same for me.
Powered via a Powermagic box, using inline fuse adaptors from the fuse box behind the glovebox.
|
| 6th Aug 2014 2:07 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
Likewise I have mine installed to the left of the mirror and have run the cable through the roof linning and down the A pillar to the fuse box  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 6th Aug 2014 3:48 pm |
|
|
|
|
Jetlag
Member Since: 11 Mar 2012
Location: Johannesburg
Posts: 205
|
thanks guys - greatly appreciated Disco 4 SDV6 HSE with Compomotives, BFG 265/65R18s, BigCountry drawer system, Melvill & Moon covers, NL 52L fridge, FR Spare Wheel Carrier, FR Roof Rack, Tenco RTT, FR 50" LED Bar, dual spots, Lift Rods, Mantec Snorkel, C-TEK Dual batt system, 270 Ostrichwing, Maxtrax, Icom ID-5100, Icom ID-51 as secondary, IIDtool BT
Follow my adventures on Instagram @XpeditionAfrica
|
| 21st Aug 2014 3:31 pm |
|
|
