Bovril_dog
Member Since: 29 Jul 2019
Location: London
Posts: 2
  
|
| Where does the cable for the front air sensor plug in |
|
Hi All,
Recently bought an 07 Discovery 3 and noticed the Ext air temp on the dash was 2 blank. Removed the front grill and found the sensor behid the bumper. The cable leads away from it but is not connected and I cannot see where it should connect to.I have removed the sensor and cable for now as shown in the photo. Can anyone take a photo to show where it should be routing to.
I removed the driver's side light and found a grey connector that looks to have been cut, can anyone shed some light on what should be connected to this. Please see attached photo.
Many thanks
Paul
|
 13th Aug 2019 5:54 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1782
 
|
It sits at the RH side (looking from drivers seat) of the front air dam and there should be a connector nearby that matches it
|
| 19th Aug 2019 5:10 am |
|
|
Bovril_dog
Member Since: 29 Jul 2019
Location: London
Posts: 2
|
Thanks, i found it, tucked away behind the front bumper near the air suspension valve.
|
| 19th Aug 2019 8:38 am |
|
|
