Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
Can anybody tell me if these injector readings look ok
Afternoon guys
As title can anybody please tell me if theese injector readings look ok
I’ve tried several times but can’t seem to catch the attention of anyone in the know
Getting a bit fed up with D3 now can’t find out what prob is and will appreciate an opinion on them
Cheers
Andy
05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
14th Mar 2018 5:00 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
All look okay to me, if you try a search you will find loads of pics along the same lines, main thing seems to be so long as they are under 1300 they are serviceable.
Ps what is the problem?
14th Mar 2018 5:04 pm
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
Cheers for the reply
Problem is under load/driving it seems to be slightly misfiring/ juddering
Had complete new clutch
New batt
Blanked EGRs
New turbo pipe
Freed of actuator
Cleaned map sensor
All discs recently new no brakes/calipers sticking
Changed gearbox and transfer box oli
New fuel filter
When last on diagnostic it showed turbo underboost fault ?
Noticed also oil around intercooler under rad, could this cause it to have theese symptoms
Andy05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
14th Mar 2018 5:16 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Ref the oil leak it would have to be quite a split to lose that much boost, but its got to be worth a looksee?
Again a search might reveal some info, Im sure Ive read threads along the same lines of the oil/intercooler leak, but not the juddering on a manual trans.
Might sound daft but are all the tyres round?
14th Mar 2018 5:55 pm
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
Hi
Doesn’t sound daft,
I had the same thoughts and had a pair on the front on Saturday and am having the tears done this weekend, I forgot to add those to the list lol
It’s more of a miss/ power restriction than vibration
I have searched loads but can’t find much relevant ie: poss turbo, but I ain’t getting any smoke or limp mode etc, ticks over and revs perfect until driving/under load
Thanks for all your suggestions, greatly appreciated
Andy05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
14th Mar 2018 6:08 pm
Sharpy1980
Member Since: 16 Mar 2017
Location: Kent
Posts: 81
Thinking outside the box have you checked you prop centre bearing as that could cause a vibration under load, I’d be happy with those injector readings Current
2007 Discovery 3 SE Tdv6 Zermatt
2007 RRS HSE Tdv8 Zermatt
2007 RRS HSE Tdv8 Lugano Teal
Gone
1999 D2 Td5 XS Facelift Java
2000 Freelander who cares
1986 Defender 90 200 Tdi Blue
1996 D1 V8i ES Green
1994 D1 200 tdi S Grey
14th Mar 2018 10:29 pm
Leesbay
Member Since: 20 Dec 2011
Location: rainford
Posts: 1581
A worn dual mass flywheel can cause a vibration, did you have that changed along with the clutch kit?....................................................................................................
If my wife ever sells my stuff for what she thinks I paid for them, you lot are gonna get some bargains!
14th Mar 2018 10:38 pm
Randylover
Member Since: 31 Jan 2011
Location: Staffordshire
Posts: 1172
Propshaft seemed ok when last checked a couple of months ago
It’s on the list to check again this weekend.
As for clutch, as stated just had a complete new clutch fitted
Cheers for suggestions
Andy05 TDV6,"S" in all colourcoded Zermatt silver,7 seats winter pack HK 6cd stereo,Dual climate,Xenons,
Mods:
Re-Con Engine,De-Tango,Reverse camera,Fog/DRl lights,Aux Battery, perm Aux socket in boot,LED Volt meters in roof panel,Built in tom tom, Strobes fitted in grille, Aux switches for trailer lights fitted in roof panel,Roof Rails,Grille conversion
14th Mar 2018 11:03 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
I did replace my rear prop a few months ago as centre bearing rubber was splitting, upon removal the rear u/j was very very notchy and I would say partially siezed, cant say it made any noticeable difference to the drive though!
I reckon you will need to remove it to check it out properly, the rear prop to flange bolts are kin tight
Using a std u/j where there is no angle change is a bad design and is going to wear the needle rollers in one place only.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
