brianc1977
Member Since: 10 Jan 2010
Location: leighton buzzard
Posts: 32
  
|
Changed fuel filter today and cant get any fuel pressure at the bleed port under the bonnet have double checked the colour codes ect on the filter taken it off and refitted it but the same turn key on till dash lights come on depress bleed valve and nothing any ideas ?
|
 20th Nov 2010 6:52 pm |
|
|
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
  
|
Think there is an automatic bleed procedure like on TD5's from what I remember.
|
| 20th Nov 2010 7:09 pm |
|
|
The Transformer
Member Since: 22 Jan 2010
Location: Leicestershire
Posts: 1791
|
10forcash has posted this comment in another thread, which may be useful: "Filling the fuel filter is quite easy and doesn't need the LP bleed procedure above...
fit filter, turn on ignition for 40 seconds, turn off ignition, turn on for 40 seconds another 4 times, start engine & run for 2 minutes - applies to <07MY and 07MY onwards
if it's relatively quiet, you can hear the in-tank pump running, the air is pushed out to the return line, not to the engine
also, when fitting the <07MY filter, make sure you hear the pipe fittings click into place on the filter"
http://www.disco3.co.uk/forum/topic32281.html?highlight=filter
|
| 20th Nov 2010 8:29 pm |
|
|
brianc1977
Member Since: 10 Jan 2010
Location: leighton buzzard
Posts: 32
|
Oh well recovered to stealers tank pump failed 
|
| 22nd Nov 2010 7:05 pm |
|
|
