Member Since: 18 Oct 2010
Location: Surrey
Posts: 1
Commercial rear windows
I have just purchased a Disco 3 commercial 2007 and very happy with it, the rear windows have a plastic cover that I can remove, however I have been wondering how I can get the rear windows to operate just to give my dogs some air!, if anyone can advise I would appreciate this. Apologies if this has been answered before on the forum.
Many thanks
Matt
18th Oct 2010 10:12 am
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4284
Welcome
If you remove the door card, few screws that are obvious and ones under the door handle and the connector should be just out of its socket. Just push it home til it clicks and you should be right. Thats how it went on mine anyway so hopefully you'll be right.A happy childhood ... is the worst possible preparation for life.
18th Oct 2010 10:19 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Unfortunatly LR are now ripping the electric socket out of the window motor ...
So you are going to need new motors ( the car wiring harness is still intact )G4 Gone ...but not forgotten
18th Oct 2010 10:42 am
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4284
wiggs wrote:
Unfortunatly LR are now ripping the electric socket out of the window motor ...
on an '07 ?A happy childhood ... is the worst possible preparation for life.
18th Oct 2010 10:46 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
oh ..didnt read that
new 2010/2011 im on aboutG4 Gone ...but not forgotten
18th Oct 2010 10:53 am
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4284
I did always wonder why they left them in there anyway
Little savings like these must be where they're getting the money for the new investments A happy childhood ... is the worst possible preparation for life.
18th Oct 2010 11:04 am
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
One of the things I love about my D3 Commercial is the Plastic Window guards and the fact the rear windows dont open
18th Oct 2010 11:04 am
Sonic3d
Member Since: 22 Nov 2005
Location: Ross on Wye Herefordshire
Posts: 872
Mines a 57 and there are no motors in there, they replace the motor with cast piece that locks the mechanism up. Just remove this piece and fit motors I can resist everything except TEMPTATION
Can Am Commander 1000XT
Seen the light and bought a 4Motion T5
18th Oct 2010 11:19 am
t_m77
Member Since: 29 Mar 2009
Location: United Kingdom
Posts: 6
Mine is a 57 and I have done this. The motor wire had been pulled out and a lump of mastic stuck in there, removed this. The worse problem was the window was stuck to the door trim and took a bit of help to get it to move. A couple of hours in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum