Kiwi
Member Since: 24 Jan 2011
Location: Surrey
Posts: 46
|
D3 dipping suspension and fault after strut change |
|
Can someone please give me a steer. I got the suspension fault a while ago and have ended up rebuilding compressor, cleaning front,centre and rear valve blocks and upon spraying soapy water around foun the front struts had perished rubber so I’ve replaced both front strut assembly’s and on initial startup get no issues but after leaving the car for an hour or so on a level surface I started it to then get the fault coming up as before.
I plugged in my neighbours snap on diagnostic and have these coders which I clear down but the fault keeps coming back and I’ve noticed that the front of the car is dipping so eiither leaking out or needs some sort of recalibration ?
Can someone provide the process I do when repolacing struts ?
B1B02
B1B70
I cannot find anything else wrong physically so really need a bit of direction.
Thanks
|
13th Dec 2018 9:28 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1780
|
Those codes indicate "air bag" fault so you may have pulled a connector off one of the air bag sensors at front of vehicle - do not confuse with suspension
|
14th Dec 2018 8:43 am |
|
|