p-jury
Member Since: 20 Nov 2018
Location: Tidworth
Posts: 4
  
|
Good afternoon all, I am in the process of making a bracket up to fit to the original tow bar mounts. I am away at work and know where near my car and wont be for a few days. Does any one have or can grab me the hole spacing for the 6 bolts in the tow bar mount.
I know that they are 90mm apart (left to right) what I need to know is how far up the next set of holes are.
I think they are 55mm then 75mm from the bottom but I just cant remember and don't want to start drilling holes just yet.
I have attached a copy of the tow bar that I have fitted. It is a land rover one.
Thank you.
|
 22nd Nov 2018 1:13 pm |
|
|
Hot Tub
Member Since: 15 Aug 2017
Location: Milton Keynes
Posts: 1071
 
|
You might have potential insurance problems from using a none approved & tested towbar  Welsh Collie Chauffeur Service To Barney & Rooney.
|
| 22nd Nov 2018 1:17 pm |
|
|
p-jury
Member Since: 20 Nov 2018
Location: Tidworth
Posts: 4
|
Thanks for the replay, it wont be for towing with I am making a plate up to mount between the tow bar and the mount on the vehicle. I just need to be able you use all 6 holes to move to tow bar up and down.
|
| 22nd Nov 2018 1:24 pm |
|
|
