Member Since: 12 Sep 2013
Location: Leeds
Posts: 6
D4 cup holder Removal.
Hi all. Has anyone removed the cup holder on their d4. I'm trying to remove mine to replace it after spilling something VERY sticky in it.
I've tried pulling it upwards and the front seems to unclip but the rear seems more stubborn.
Any tips?
Grab and pull hard. There are only metal clips on the front and back ... and remember: you have to get the cup holder out without any tool when accessing the emergency release for the EPB.
4th Mar 2014 8:59 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Yep just pull harder I did something similar and spilt some sticky syrup in there so pulled it out and stuck it in the dish washer Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
4th Mar 2014 11:09 pm
dean.hall
Member Since: 25 Dec 2013
Location: Back on the Betty Ford Clinic
Posts: 94
Not the image I wanted in my head of Hairy Dan and sticky syrup in his car.
4th Mar 2014 11:40 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
5th Mar 2014 8:33 am
steveraspberry
Member Since: 18 Sep 2011
Location: Nr Sevenoaks,Kent
Posts: 2081
Have you got a 750ml Camelbak water bottle? If so, put it in the passenger side then pull laterally towards you, Mine usually comes out a treat using this method Seriously though, this does work
HTHMy17 Volvo XC90 Inscription
MY15 Mitsubishi L200 Barbarian
RGK Tiga Fx Wheelchair,
Large Alsation called Abbs
Medium blue Staffie called Piglet
Medium Alsation called Bailey
5th Mar 2014 8:53 am
DB
Member Since: 12 Sep 2013
Location: Leeds
Posts: 6
Thanks all but still struggling . Unpops at the front but the rear still stuck. Does it make a difference that I have the fridge in the middle? Don't want to break anything.
Has Anyone actually done this?
5th Mar 2014 10:06 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
The fridge doesn't make any difference, you just have to give it a good tug or you could try using a screwdriver to lever it up. As Voug says the trim in question needs to be removed quite easily as you need access underneath it if you have to use the emergency release for the parking brake Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
5th Mar 2014 11:22 pm
Gunny
Member Since: 15 Oct 2013
Location: Yorkshire
Posts: 51
Mine was stuck with a coffee spill. Just use a scraper under the front trim, came out easy. It's stronger than you think but it comes out.
6th Mar 2014 9:30 am
Garagegmx
Member Since: 09 Feb 2014
Location: UK
Posts: 916
Put your fingers facing outwards into the cup holder, one had to the front and one to the back. Force against the sides and pull up sharply and with a bit of gusto. If that fails pull it out one side as you've done, put it back and keep doing it. Eventually it will come out.
6th Mar 2014 10:04 am
promitheus
Member Since: 04 Jul 2009
Location: Afidnes, Greece
Posts: 570
This may work:
I will probably use one too, to fix my recirculation flap issue...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I did something similar and spilt some sticky syrup in there so pulled it out and stuck it in the dish washer 
Seriously though, this does work 
