countryman
Member Since: 25 Oct 2008
Location: Northumberland
Posts: 172
  
|
| D4 Exhaust Clamp Availability or part number. |
|
Hi I have a D4 2011, the exhaust pipe has started to split at a welded joint on the pipe running to the rear box, drivers side.
For the moment I have clamped the two bits of pipe together.
Having a look at a 61 plated cars exhaust, ( I asked the owner first! ) there is a factory fitted clamp over the connection of the two pipes, obviously there is an issue which Land Rover has tried to rectify.
Has anyone got a part number or price / availability of this clamp to retrofit onto my car?
|
 8th Jul 2014 11:07 am |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
 
|
Is the car still under warranty? If not a may be worth enquiring about a warranty claim anyway as it would appear that there are a few people that have had the back box fall off. Mine is a MY2012 and the back box fell off and I took it into Team Valley Land Rover and they knew exactly where it had broken off without looking at the car! They were just going to fit a new back box but Land Rover instructed them to fit a whole new system  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 8th Jul 2014 11:46 am |
|
|
The Large One
Member Since: 20 Apr 2007
Location: Down the polytunnel
Posts: 6143
 
|
TECHNICAL BULLETIN
LTB00568
08 JUL 2013
© Jaguar Land Rover Limited
All rights reserved.
SECTION: 309-00
Exhaust Intermediate Pipe Repair
AFFECTED VEHICLE RANGE:
Discovery 4 / LR4 (LA)
Model Year:
2010-2012
VIN:
AA510178-CA631180
Engine:
V8 5.0L Petrol
Discovery 4 / LR4 (LA)
Model Year:
2010-2012
VIN:
AA510178-CA631180
Engine:
TDV6 3.0L Diesel
Range Rover Sport (LS)
Model Year:
2010-2013
VIN:
AA212145-DA771200
Engine:
V8 5.0L Petrol
Range Rover Sport (LS)
Model Year:
2010-2013
VIN:
AA212145-DA771200
Engine:
TDV6 3.0L Diesel
Range Rover Sport (LS)
Model Year:
2007-2010
VIN:
7A971657-AA212145
Engine:
TDV8 3.6L Diesel
MARKETS:
All
CONDITION SUMMARY:
Situation: Exhaust intermediate pipe repair.
Cause: Weld failure. Suggested Customer Concern Code - E43.
Action: Should a customer express concern, follow the Service Instruction outlined below.
PARTS:
LR050947
Exhaust pipe LH - L319 AJ133 5.0L N/A, L320 AJ133 5.0L N/A, L320 LV6 3.0L (DPF), L320 LV8 3.6L (DPF) Only
Quantity: 1
LR050948
Exhaust pipe RH - L319 AJ133 5.0L N/A, L320 AJ133 5.0L N/A, L320 LV6 3.0L (DPF), L320 LV8 3.6L (DPF) Only
Quantity: 1
LR050949
Exhaust pipe LH - L319 LV6 3.0L (non-DPF), L319 LV6 3.0L (DPF), L320 LV6 3.0L (non-DPF), L320 LV8 3.6L (non-DPF) Only
Quantity: 1
LR050950
Exhaust pipe RH - L319 LV6 3.0L (non-DPF), L319 LV6 3.0L (DPF), L320 LV6 3.0L (non-DPF), L320 LV8 3.6L (non-DPF) Only
Quantity: 1
TOOLS:
No Tools Required TLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
|
| 8th Jul 2014 12:44 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
There you go Russell, TLO  obviously still keeping his hand in  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 8th Jul 2014 12:57 pm |
|
|
countryman
Member Since: 25 Oct 2008
Location: Northumberland
Posts: 172
|
Big thanks guys
|
| 8th Jul 2014 1:12 pm |
|
|
countryman
Member Since: 25 Oct 2008
Location: Northumberland
Posts: 172
|
Just been quoted £390.00 + VAT from Team Valley to replace the pipe as per LR technical sheet!!
Usually they are very good but even to get a price for the clamp for self fitment was £90.00 + Vat! 
I believe they are available for about £30.00, what are they playing at?
|
| 8th Jul 2014 1:30 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
 Would have thought Land Rover would do an abnormal warranty claim if they are admitting there is a problem  Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
| 8th Jul 2014 3:01 pm |
|
|
Singh
Member Since: 15 Dec 2014
Location: Leicester
Posts: 135
|
Bit of a thread revival here, but I have this same issue of the weld having cracked around the right hand rear box on my 2012MY SDV6. From what I can tell, the TSB only covers the TDV6, but my 61 plate car looks to be within the VIN range if that makes sense.
I have sent a note to my supplying dealing to ask for details/confirmations.
If it is not covered, is simply welding it on an option?
|
| 8th Sep 2016 1:03 pm |
|
|
