Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
Nice logs etc etc MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
6th Feb 2016 8:43 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The rest of the functionality remains as before with the dash remaining in daylight mode even though the sidelights are actually on. Sidelights can still be selected as normal, although all it actually does is turn on the green indicator light, dim the dash slightly and turn on all the interior backlights and mood lights (where fitted).
The only thing currently not enabled is the regular parking lights (does anyone use this?) as I appear to have run out of connectors. I've ordered the required bits so that will be sorted later this week.
Obligatory scribbled on wiring diagram, with test results, corrections and crossings out:
Nothing went bang or anything.
Testing the CJB modifications:
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 15 May 2013
Location: Chester
Posts: 7633
I won't take that bet, even on a D3 without fairy lights and without remote folding mirrors ... You still probably could
7th Feb 2016 7:09 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
After living with it for a couple of days I really like this configuration. It is a lot more reassuring having the external lights as a means of knowing the vehicle is actually locked (or super-locked in my case). Plus the safety bonus of the external lights coming on automatically when people are loading and getting in on a poorly lit street.
I'll probably keep it this way and tweak it so that the parking lights work in the original way. Next will be changing the number plate lights to LEDs and then add cornering lights.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Made a couple of patch leads to provide a fused feed to the left and right lights, which also restores normal parking light function:
Click image to enlarge
Installed in the CJB:
Click image to enlarge
I've left the modification so that it triggers the front & rear LEDs from the unlock command, but it takes 2 minutes to change them to ignition switched or to revert to standard.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 19 Mar 2016
Location: Suffolk
Posts: 34
Hi Robbie,
Thanks for sharing your workaround.
I've been trying to achieve option 2 via the servicing function of SDD but using the Scandanavian or Poland DRL settings turns the led's and dipped beam on as soon as the engine is started whereas I only want the LED's.
What terminals do in need to connect the jumper cables in so that my LED's only come on when the engine is started?
28th Mar 2016 10:14 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I'm not at home to check the numbers but there are unused ignition switched fuse positions on the CJB, so a multimeter would be your friend.
I do commend the 'on at unlock' option to you though. It may be a bit BMW but it is very practical.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 19 Mar 2016
Location: Suffolk
Posts: 34
I had that on my BMW E61 angel eyes which had to go to make way for the Disco.
I think I'll go for the on at ignition but would like front only and not rear so may have to incorporate some diodes.
29th Mar 2016 7:12 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
For that you will need to run a circuit direct to the headlights rather than jumper wires at the CJB.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 12 Aug 2012
Location: Manchester
Posts: 60
Nice write up.
Always amazed at some of the things you guys come up with
If I made up a similar lead does the wire have to be on a specific side or does it not matter?
Cheers
29th Mar 2016 11:09 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I'm not sure I understand your question. By 'side' do you mean the separate circuits for the left and right lights?Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 12 Aug 2012
Location: Manchester
Posts: 60
Apologies. Want I meant was if I built a similar lead which side should i take the live feed from, or does it-not matter. In the photos it looks like the top side. Cheers.
3rd Apr 2016 10:49 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I used the live feeds for the adaptive lights (it does not matter if they are fitted or not) which are split left and right. I just mirrored these to provide separate feeds to the left and right parking lights - red label for the left, green label on the right.
If you look closely at my pictures you can see I mark the mods purpose and the too and from fuse positions on the wires. This helps avoid errors and aids anyone who needs to work on the CJB in the future.
When I unlocked the vehicle last night on leaving a pub in Retford a D4 owner came over to ask why his lights did not come on when unlocking. He lost enthusiasm when I mentioned additional wires.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 17 Dec 2013
Location: Chichester
Posts: 177
Hi Robbie. Sorry to come to this thread so late but am interested in this mod. From what I can tell you have patched the live feeds from the adaptive lights to the parking light fuses so that these would be live when the adaptive lives come on. Is it as simple as that? I am a bit confused about how you revert to 'ignition on' mode rather than 'on opening' as your earlier pictures seem to show the same mod but with different leads. What have I missed? thanks for any help. Andy.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
thanks for any help. Andy.
