Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > In Car Electronics (D4)

D4 GVIF video interface install.
Post Reply  Down to end
Page 3 of 3 <123
Deanopeps
 


Member Since: 25 Aug 2012
Location: Fareham
Posts: 19

England 2006 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Cheers Ian and Flack.

That is very clear now and I have seen a guide on here that shows how to connect into the Aux by the passenger foot well. I guess the only problem with that is you have to put a 3.5mm (with no input) plug into the Aux input otherwise it does not switch through?

I have fitted 3 phonos at the back of the centre console next to the Aux socket and these are on AV2 of the GVIF unit so I can plug in a video feed there and for the moment I have a phono to 3.5mm adapter for plugging into the Aux - that actually works quite well. The red and white phonos are wired in to the GVIF also on AV2 but I will probably wire the GVIF Audio out to the front Aux at a later point.


Now I just need to get some headrest DVDs and I will nearly be there!
  
Post #97876218th Sep 2012 6:33 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 3 of 3 <123
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site