SGH
Member Since: 21 Dec 2009
Location: Hellingly. East Sussex.
Posts: 1178
|
Can anyone let me know how to wire in resistors needed when fitting D4 lights to D3 please.
Done a search but cannot find anything.
Simon Defender 300Tdi 110 HCP - Keswick Green
Discovery 4 SDV6 HSE LUX - Montalcino Red/Black Pack - Gone
Connect L2 Double Cab - Moondust Silver
Connect L1 - Moondust Silver
VW California Ocean 150PS DSG - Reflex Silver
|
22nd Jan 2010 12:25 pm |
|
|
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
|
Just connect the resistors across the two indicator wires one resistor per side.. Yellow and brown if i recall correctly, the D4 lamps are all black wires so best to follow the wires from the indicator bulb holder on your old lamps to find the correct wires. I fitted mine onto the car side of the wiring loom as it was easier.
|
22nd Jan 2010 12:33 pm |
|
|
discoBizz
Member Since: 20 Sep 2008
Location: Manchester
Posts: 1416
|
What type resistor is needed? Ohm?
Thanks
|
22nd Jan 2010 12:46 pm |
|
|
|
discoBizz
Member Since: 20 Sep 2008
Location: Manchester
Posts: 1416
|
Cheers Martin!
Missed that one: Quote:6 Ohm high-power (25-50 Watt) resistor
|
22nd Jan 2010 1:05 pm |
|
|