BigElk
Member Since: 22 Jul 2017
Location: Peoples Republic of Kent.
Posts: 60
 
|
| D4 seats into D3 question. |
|
I have a 2009 D3 XS and have fitted electric front seat from a 2016 D4 commercial. I have got everything working regarding seat adjustments, thanks in no small way to very helpful threads on here.
The only thing i cant get working though is the electric Lumbar adjustment on the drivers seat. Has anyone else found the solution to this please?
|
 3rd Oct 2018 9:49 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 193
|
Have you used a passenger switchpacket?
I have, so the adjustment is missing. Thinking of using something like this switch (with a smaller knob)
Easy enough to wire it up.
https://rover.ebay.com/rover/0/0/0?mpre=ht...2268023096
But haven't missed the adjustment enough jet 😋
|
| 3rd Oct 2018 10:11 am |
|
|
BigElk
Member Since: 22 Jul 2017
Location: Peoples Republic of Kent.
Posts: 60
|
No. It came with the switch on each seat. The passenger seat is manual adjustment, but the drivers is electric. Three buttons.
|
| 3rd Oct 2018 10:37 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 193
|
So you still got the original driver side switchpacket, using the memory ECU?
|
| 3rd Oct 2018 10:42 am |
|
|
BigElk
Member Since: 22 Jul 2017
Location: Peoples Republic of Kent.
Posts: 60
|
They are not memory seats.
|
| 3rd Oct 2018 11:44 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 193
|
Then in not sure what the problem is. Sorry.
Thought you had done the mod with changing switchpacket and rewire it.
|
| 3rd Oct 2018 9:05 pm |
|
|
BigElk
Member Since: 22 Jul 2017
Location: Peoples Republic of Kent.
Posts: 60
|
Fixed.
After looking, and relooking at a wiring diagram for ages, it suddenly dawned in me that the feed plug for the Lumbar pump on the D4 seat didnt have a feed going to it from my D3 loom. Ran a wire to it this morning, and now it works pefectly. 👍
|
| 4th Oct 2018 9:32 am |
|
|
