Clivep
Member Since: 20 Jan 2024
Location: West London
Posts: 1
|
| D4 Start Stop Button Voltages |
|
Hi, I'm having some thoughts on an immobiliser and took a brief look at the voltages on the 4 pin connector on the Start Stop button.
I was expecting something simple, but what I found was 0v, 6.5V, 6.5V and almost 0V.
When the button is pressed, one of the 6.5V drops to 3 V.
I think I need to get an oscilloscope on the wires to see if it is DC or data and see what is going on.
Does anyone have any experience of this?
TIA
|
 20th Jan 2024 7:59 pm |
|
|
