DISCO3.CO.UK - View topic - desperate help plse with fitting drivers electric seat only

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > General

desperate help plse with fitting drivers electric seat only

Page 2 of 2

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

2005 Discovery 3 TDV6 Base 7 Seat Auto Java Black

Irwin wrote:
The wiring diagram can be found on page 206 of http://media.disco3.co.uk/gallery/albums/u...ing%29.pdf

Those look like the wires you need to provide power to, large browngreen and black wires.

ur a star bless u

i spent some time doing a search before hand , but the ones i found were about how to install memory and heated seats

thks for the link and will check it out

going to have another look tomorrow as i'm frozen ,

am extremely grateful for the fantastic help

30th Nov 2016 5:01 pm

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

done the alteration of the brown and black wiring

now got 12 volts at the memory ecu box

still nothing

been reading through again and confused about the small red /white and black wire

if i cut them i will have the wires going into the memory box , are these left disconnected

and on the other side, seat loom then goes into the main cars connector

sorry guys but pulling my hair out a bit and me being so dense

think i'm so close but getting rather confused

3rd Dec 2016 7:53 pm

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

done another pic

wires on the left are from the cars wiring loom

on the right have put a screw driver under the two wires i think i need to cut into

when i cut them

do i put the red/white wire from the seat loom onto the main car connector wires

or from the grey multiplug

as there will be two wires left over after being cut

thks guys , think this is the last bit of getting these seats working

any help would be so appreciative plse

3rd Dec 2016 8:14 pm

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

finally managed to get the seat to work

but only for a 0.5 second burst

massive thks to all the people who reported how to do the wiring

4th Dec 2016 4:37 am

993porky

Member Since: 28 Jan 2013
Location: Sunderland
Posts: 82

2006 Discovery 3 TDV6 SE Auto Zermatt Silver

Hi gstuart
Reading with interest, im doing same upgrade.
Which wires did you finally cut an join?
Any help or photos would be a great help
Thank you

29th Jan 2018 11:29 pm

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

hi

indeed took me a little while to get my head round it

the link below , if u scroll through i listed what posts will show u all the wiring needed

hope that helps

https://www.disco3.co.uk/forum/electric-se...ctric+seat

29th Jan 2018 11:49 pm

993porky

Member Since: 28 Jan 2013
Location: Sunderland
Posts: 82

Thank you for reply gstuart
Much appreciated

29th Jan 2018 11:56 pm

gstuart

Member Since: 21 Oct 2016
Location: kent
Posts: 13635

ur very welcome

know i wouldn’t have stood a chance without the great help from the forum

plse let us know how u get on

30th Jan 2018 12:01 am

Pete K

Member Since: 15 Jan 2016
Location: GL
Posts: 10363

2005 Discovery 3 TDV6 HSE Auto Rimini Red

GS Had a 300mA leak causing the battery to go flat

Removing fuse 46 (drivers seat fuse) appears to have removed this.

3rd Sep 2018 6:23 pm

Page 2 of 2

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.