Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

How to fit Venture cam system D3
Post Reply  Down to end
Page 1 of 2 12>
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 
How to fit Venture cam system D3

Well got a full docking station with venture cam from a L322, so time for some retro fitting in the back of the D3 I think.

the housing will not be used as it wont fit on the D3 I don't think but it not arrived yet so wil have to wait and see how , what, why etc.

here is the unit for info




I have it already enabled in the CCF so it already looks for it as I have it active, so hopefully when the on signal is sent it boots the camera via the 433mhz transmission.
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115813516th Sep 2013 9:24 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DG
Site Moderator 


Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50930

Wales 

Not sure Wiggs ever got his working ...something to do with "cans, buses and mosts" ISTR
 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021  
Post #115819416th Sep 2013 11:35 am
View user's profile Send private message View poster's gallery Reply with quote
Russell
 


Member Since: 23 Aug 2007
Location: Kent
Posts: 10564

United Kingdom 

As DG has said, I do not think this is possible, Wiggs has tried for a while but I do not think he got it to work as designed.
 MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club 
 
Post #115821416th Sep 2013 11:59 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Ken
  


Member Since: 20 Feb 2006
Location: Here
Posts: 10865


TBH it was POO in the FFRR anyhow Rolling with laughter
  
Post #115821816th Sep 2013 12:04 pm
View user's profile Send private message View poster's gallery Reply with quote
MikeS2005
 


Member Since: 13 Sep 2008
Location: Midlothian
Posts: 920

Scotland 2005 Discovery 3 TDV6 HSE Manual Zambezi SilverDiscovery 3
wont work

Hi
It dosnt work as the D3 system is different to the FFRR electronics and the venture cam just wont talk to the D3s electronics, its a software issue
cheers
  
Post #115823216th Sep 2013 12:23 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 

Ah but I am inFFRR mode on the screen, and the unit tries to connect to a CAM when I select it, so we have to wait and see, will report my findings once it arrives Thumbs Up
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115829916th Sep 2013 2:20 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 

well the part arrived today here is some pics of it removed from the L322 trim and back holder,

this has video out to get to the front touchscreen and the receiver for the unit itself,

now I need to get the wiring diagram and bit of loom to allow the integration of the electrical setup!!

hello scrappies!!! here we go again!









 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115886417th Sep 2013 1:10 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 
HELP REQUIRED!!!

Right guys,

the helpful Ray at


CWS 4x4
01458 834930
Park Farm Trading Estate
Park Farm Road
Glastonbury
Somerset
BA6 9NN

has confirmed he has a L322 touchscreen motor in currently,

would anyone be willing from that neck of the woods to do a removal of some loom on my behalf, as being the complete other end of the country its not really practical!!

would need the passenger side front dash entry area where the docking module is located wiring to the touchscreen, and if its has RSE the overhead complete rear roof console and the complete loom from it to where ever it goes, (this is unknown and would be a good photo opportunity for the forum.

would anyone local be able to help??

thanks Rob
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115886817th Sep 2013 1:31 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

As far as I'm away there is only 4 wires needed

Pos
Neg
2 x can bus

Then a coax to the touch screen .. I would be making my own up in case it dosent work !!

You can proberly get all them ( except the coax ) from the diagnostic port .. Saves cutting any wires while you test
 G4 Gone ...but not forgotten  
Post #115886917th Sep 2013 1:37 pm
View user's profile Send private message View poster's gallery Reply with quote
Robbie
 


Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932

United Kingdom 2013 Discovery 4 3.0 SDV6 HSE Auto Baltic BlueDiscovery 4

Why would you want one of these? It was hardly state of the art back in 2004 and I understand it only gained popularity with the dogging community?





Oh, I see.
 Land Rover - Turning Drivers into Mechanics Since 1948

Battery & Quiescent Current Drain Testing

Diagnostics for:
Defender, FL2, D3, D4, Evoque, RRS & FFRR
A not-for-profit enterprise


 
 
Post #115887117th Sep 2013 1:39 pm
View user's profile Send private message View poster's gallery Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 

Rolling with laughter Rolling with laughter Rolling with laughter

great for sending the wifey out to hold it in the dark!!!
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115887417th Sep 2013 1:47 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 

[quote="Robbie"]Why would you want one of these? It was hardly state of the art back in 2004 and I understand it only gained popularity with the dogging community?



do you have the wiring diagram at all Robbie#'

cheers in pdf would be great
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115887517th Sep 2013 1:48 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Martin
Site Admin and Owner 


Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18440

United Kingdom 2006 Discovery 3 TDV6 SE Manual Buckingham BlueDiscovery 3

wiggs wrote:
As far as I'm away there is only 4 wires needed

Pos
Neg
2 x can bus


Affirmative!

Pin 1 Earth
Pin 3 MS-CAN HIGH
Pin 4 12V Permanent
Pin 7 MS-CAN LOW

The SMB cables from the site shop will fit both the screen and the camera dock video ports.

All the 4 connections are available from the OBD port (for testing), or for real fitment then at the head unit.

I wouldn't bother with the loom from the L322, you'll end up using only the dock connector and a short pigtail from it anyway. It won't be plug and play in the D3.
 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know! 
 
Post #115889317th Sep 2013 2:10 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
robbo770
 


Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294

Scotland 

got the SMB in readiness from the last shop purchase run!

thanks for the info, need to see if I can get a plug for the socket on the back, to do the job right

thanks for the info on the pins Thumbs Up
 FFRR SC 4.2

Rejected!! RRS2
Fit TDV6 intercooler hoses
Fast Road intercooler
De-Cat pipe
D3 to B4 front end Upgrade
OEM TV/DVD Screens+wireless Headphones! 
 
Post #115889417th Sep 2013 2:17 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Martin
Site Admin and Owner 


Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18440

United Kingdom 2006 Discovery 3 TDV6 SE Manual Buckingham BlueDiscovery 3

Before you spend a shed load of money/time on sourcing a connector, try wiring it up to the OBD port with temporary wiring to see if it works.
 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know! 
 
Post #115889617th Sep 2013 2:19 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site