kems
Member Since: 01 Sep 2015
Location: africa
Posts: 9
  
|
good day team
kindly assist and point me to the right solution. my disco 3 just got the engine overhauled,but then it wont start but keeps cranking. the diagnostic machine pont to the cam/crankshaft sensor. those have been changed and still no difference.some advised to check the timing and it has been rechecked timed using the the right tools but to no avail,
somebody help as i have lost hope now 
|
 8th Jun 2018 10:40 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
 
|
they do take a long time to get the fuel through
there is also a fuel lift procedure on diagnostic machines.
But if you crank sensor is flagging as failed..... You need to ensure it was alligned correctly when new one fitted
|
| 8th Jun 2018 11:47 am |
|
|
kems
Member Since: 01 Sep 2015
Location: africa
Posts: 9
|
thanks for the reply, alignment you refer to the trigger wheel or the position sensor. I heardd if it is off by millimeters can be a problem and that's what am trying to do now,
|
| 8th Jun 2018 11:52 am |
|
|
|
|
Broma
Member Since: 11 Jul 2017
Location: Stoke on trent
Posts: 10
|
Had mine rebuilt as well
Took ages to fire up
Cranked it over thought I was going
to run battrey flat
I also thought trigger wheel wasn't
Timed up properly
She spluttered then came to life
Now starts on the button
Hope this helps
Good luck
|
| 8th Jun 2018 2:41 pm |
|
|
