offtheroad
Member Since: 10 Jul 2010
Location: lake district south
Posts: 2
|
disco 4 seats disco 3 car help please |
|
ust bought some brand new d4 leather seats to put in my d3 commercial and found passenger one works but only for back n forward not lumber or back support and the driver one doesnt work at all i have 12v on 2 pins on the driver seat and 12v on 1 pin on the passenger
all the fuses are in place and good
does anyone know if u have to put a link in or something
cheers guys
matt
This post has been edited by the site administration team
Please post the same subject in one thread only
|
12th Jul 2010 9:17 pm |
|
|
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4284
|
What year is your commercial?
Does the drivers seat have memory function/ module? I think you'll have to bypass that as your car may not be compatible. A happy childhood ... is the worst possible preparation for life.
|
12th Jul 2010 10:44 pm |
|
|
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
|
Passenger rev the pos and neg supply around drivers you'll need a bit of wiring know how or a tfc
|
12th Jul 2010 11:10 pm |
|
|