Probably help if I asked for help in the correct area lol
Morning all
I was driving my disco last night and the amber parkbrake symbol came on, I have plugged the car in this morning and it’s fault is lost communication with parkbrake module, I have no other problem s with the car any ideas? I have looked through some of the other threads but none seem to cover this, just wondering if any one can shed some light on it
Many thanks neil
11th Feb 2018 10:45 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Have you cleared the fault and see if it comes back?
The lost communication thing happens regularly on most modules.
Usually when I plug my tester in there is a couple of them, usually just clear them and move on
Hi
Yes I cleared it but soon as you turn the car on it comes on, I’m thinking it may be a bad connection some where due to the weather we have had recently
11th Feb 2018 11:08 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10362
twisted yellow wires are the can bus communication wires .
so you could check wiring under the back end of the car
and in wheel arches (left side?)
11th Feb 2018 11:14 am
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Usual suspects with water ingress at connectors are
on top of chassis nearside at spare wheel well
behind front nearside plastic inner wing protector
behind battery at bulkhead
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum