Member Since: 28 Nov 2018
Location: Carlisle
Posts: 39
Discovery 4 steering wheel in a discovery 3
Hello all...
I've just bought a discovery 4 steering wheel with cruise, radio controls, voice command and phone. It's a non heated type.
I know these use the same clock spring as the D3 but when connected up only the horn is correct.
The mode button raises the audio volume, voice command lowers the audio volume.
Minus button is station down, plus button is station up.
Station up is phone.
The call green and red buttons are innop
The cruise buttons also innop.
Car is a Discovery 3 SE 55 plate with cruise and steering and audio buttons on the old wheel.
I've read that circuit boards need to be changed when fitting heated complete wheels and paddles but wondered if I'm merely looking at changing pin locations with my set up
Thanks in advance
24th Jan 2019 5:03 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
It's not a straight swap.
You still need to buy and swap circuit boards to get everything to work and even then, you need the correct wheel and not one from too late a D4.
Good luck.Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
24th Jan 2019 5:10 pm
Galvernisednuts
Member Since: 28 Nov 2018
Location: Carlisle
Posts: 39
Ok thanks, can anyone tell me who it is that sells these revised circuit boards
24th Jan 2019 7:34 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
It's BBS.
You really need to read the link I've previously posted as all the info is in there, failing that, use the search facility, everything is well documented.
Member Since: 28 Nov 2018
Location: Carlisle
Posts: 39
Many thanks
24th Jan 2019 9:02 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13612
Re: Discovery 4 steering wheel in a discovery 3
Galvernisednuts wrote:
Hello all...
I've just bought a discovery 4 steering wheel with cruise, radio controls, voice command and phone. It's a non heated type.
I know these use the same clock spring as the D3 but when connected up only the horn is correct.
The mode button raises the audio volume, voice command lowers the audio volume.
Minus button is station down, plus button is station up.
Station up is phone.
The call green and red buttons are innop
The cruise buttons also innop.
Car is a Discovery 3 SE 55 plate with cruise and steering and audio buttons on the old wheel.
I've read that circuit boards need to be changed when fitting heated complete wheels and paddles but wondered if I'm merely looking at changing pin locations with my set up
Thanks in advance
Hi
Plus 1 what narpy has said , he also helped me when I done mine
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Hi i have the boards for sale if your interested at less than what blackbox charge as they were fitted to mine pm me if you wish Discovery 3 se gone
Range rover sport supercharged here:)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
