Member Since: 17 Apr 2014
Location: Bedfordshire
Posts: 17
EPB Access issues. Help please!
Hi all, really stuck with this one.
Started off with a screeching noise when trying to release park brake.
Park brake jammed on solid, car will not budge.
Tried the Emergency release cable, can pull up cable easily but park brake still on.
Cannot adjust brake shoes as peep holes are not aligned. Cannot turn the rear brake discs.
Is there any other way to have the park brake release?
Tried getting into the module in-situ as per other posts. I have this plate in the spare wheel well, does this come off?
Also the 8 T20 screws on the module itself seem to have rusted.
Any suggestions of a way ahead will be much appreciated.
Car is on Axle stands and have no access to a car lift.
6th Nov 2019 10:50 am
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
Are you pulling the correct cable? You don’t state what model it is so if you have an SDV6, you maybe pulling the wrong one. If it is the right one, are you pulling hard, really hard!012MY RRS 5.0 Supercharged Autobiography (Current)
Mods:
TPMS (Complete but got an issue)
Genuine LR DRLs (Complete)
Remote Boot close from key fob (Complete)
2016 Discovery 4 Mirrors AKA RRS2 (Complete)
2014 L405 Surround Camera retro fit (Now 2016 L319)
2013 RRS Dual View Screen fit (Complete)
2016 LR4 RSE (Complete)
2014 LR4 Homelink (Complete)
2016 FFRR Electrochromatic Wing Mirror Glass (Complete)
6th Nov 2019 5:41 pm
Feis
Member Since: 17 Apr 2014
Location: Bedfordshire
Posts: 17
Hiya
Its a Discovery 4 2010 model TDV6,
Yep yanked it hard.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum