elfrey
Member Since: 03 Nov 2009
Location: arkansas
Posts: 4
  
|
So I damaged my parking brake on the left side (passenger side in USA). I replaced the shoes which isn't the easiest thing to do. The other day I tied to apply the parking brake and I got the squealing cat or stuck pig sound from the EPB module. So I investigated the cause. My parking brake cable wasn't properly fitted, when the brake was applied it drew the cable inside the EPB module. Is there a way to reverse the cable so I can reattach?
|
 1st Dec 2013 11:55 pm |
|
|
|
|
elfrey
Member Since: 03 Nov 2009
Location: arkansas
Posts: 4
|
Read that and opened the EPB module yesterday. Unsure how to rotate the brass rod and didn't want to cause further damage. Not much room in the channel that the brass rod sits in to grip. Any ideas?
|
| 2nd Dec 2013 12:29 am |
|
|
elfrey
Member Since: 03 Nov 2009
Location: arkansas
Posts: 4
|
Flack wrote:Read this post by Disco_Mikey
http://www.disco3.co.uk/forum/topic91299.h...pb%2Bunjam
Flack 
Read Disco_Mikey's instructions to unjam my EPB. I used a hammer and chisel to get the brass rod turning. Once it was lose it unthreaded with ease. Parking brake system is working like it should!
Last edited by elfrey on 16th Dec 2013 3:08 am. Edited 1 time in total
|
| 15th Dec 2013 7:55 pm |
|
|
|
|
