Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
FBH remote receiver
I have just removed the wheel jack cover to access the wire to connect into the remote FBH receiver which I found no problem,I also found this connector as well,it’s a long wire with a grommet near the end,does any body know what it’s for ? Cars a 2013 D4 HSE I hope the photos help thanks in advance
17th Aug 2019 12:37 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
If that’s the right side of the boot then it will be the rear right TPMS sensor connector.
17th Aug 2019 9:22 pm
john hall
Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
Ok thankyou for that,from what l can gather I’m probably better off without the TPMS anyway,I will purchase a good digital pressure gauge and use that weekly instead 😁😁
18th Aug 2019 7:50 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
If your profile is correct and you have a 2006 D3, what kind of FBH controller are you trying to fit because as far as I'm aware, the D3 FBH needs a controller fitting under the bonnet, whereas the D4 has a location behind the rear panel to fit a controller?Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
18th Aug 2019 7:57 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
In his post he says it’s a 2013 Disco 4.
18th Aug 2019 8:22 pm
M3bobby
Member Since: 21 May 2018
Location: Sleaford, LINCS.
Posts: 857
john hall wrote:
Ok thankyou for that,from what l can gather I’m probably better off without the TPMS anyway,I will purchase a good digital pressure gauge and use that weekly instead 😁😁
I’ve retro fitted it to my car. Cost about £80 and with the exception of the wheel sensors it took me about 30 minutes to install.
18th Aug 2019 8:24 pm
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
M3bobby wrote:
In his post he says it’s a 2013 Disco 4.
Gotcha, never saw that.Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
18th Aug 2019 8:34 pm
john hall
Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
Sorry about that, my profile is a D3 but I have just got the D4 ,so own the 2 now ,how much better is the 4 with the 8 speed box and sequential turbos,but I can’t get rid of my D3,I have spent to much time and effort to get it “just right” ,so it’s the D3 for work ( Towing heavy trailers ) and the D4 for pleasure
18th Aug 2019 8:50 pm
john hall
Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
FBH remote pairing
In order to pair a FBH remote to the receiver on my D4 HSE ( which it won’t do) does the CCF have to be enabled first or should it pair up regardless of any CCF enabling,I would just like to know so I can rule out a problem with the receiver before I waste my hard earned on the enabling as I don’t own an IID tool ,if it’s due to it not being enabled then that’s a lot easier to deal with as a problem,I hope someone can advise
20th Aug 2019 4:26 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Yes it will pair without the CCF being enabled
When you plug the receiver in .. hold the off button on the remote for a few secondsG4 Gone ...but not forgotten
20th Aug 2019 7:25 pm
john hall
Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
Thanks for the info,it must be a bad receiver ,I have tried that system MANY TIMES but it still won’t pair,keeps on flashing at me in red so the battery is ok in the fob,I acquired the receiver from fleabay,correct part number ,just won’t work ,it will have to be returned
20th Aug 2019 8:13 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18531
Exactly which fob and receiver do you have?
There are Eberspacher type fobs being sold on eBay as D4 compatible. They're not.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
21st Aug 2019 10:59 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18531
Also have you got an antenna plugged into the receiver?06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
21st Aug 2019 11:00 am
john hall
Member Since: 19 Nov 2006
Location: Cheshire
Posts: 41
It is the genuine Landrover item,a Webasto t91 with a Landrover logo on probably as per photo
21st Aug 2019 11:21 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18531
That's an Eberspacher remote. It won't pair to the Webasto receiver.
T91 remote looks like this:
Click image to enlarge
06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum