I have a D3 XS now (57 reg) and one of the things I miss compared to my HSE FL2 is the mirrors folding in on lock (and unlock folding them out).
Do I 'just' need the relay fitting to enable that much? I'm not too fussed about having the switch in where I can adjust the fold on the fly (although it would be cool if not much extra effort).
Also cool was the reverse gear changing it to a different angle - I don't have memory seats, does that mean I definitely can't have that feature?
21st Sep 2020 3:54 pm
daveperry
Member Since: 26 Jul 2020
Location: Hull
Posts: 7
So I checked my Settings menu this morning, reverse mirror dip was off so I set it to on - and it didn't behave. Is that because I don't have the memory seats?
22nd Sep 2020 12:49 pm
Landyman37
Member Since: 21 Feb 2016
Location: West midlands
Posts: 22
I know this is a old thread has anyone got the part number for the plug and pins that fit on the mirror loom to connect to the door. I have got the mirrors but no looms.
Thanks all
17th Feb 2021 5:13 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4138
Do you have a D3 or D4 as the plugs and pins are different..? the plugs from a D4 don't match those on a D3 so you'll need to post which mirrors you have and what your car is ... (filling in your profile section would help )
I would think you have a D3 so you can take the old plugs off your current mirrors and re-wire the new mirrors to match the connectors on the D4 mirrors but it will involve adding another wire (if you have powerfold).
I think some people have also re-terminated both sides and used push connectors...
There are several threads on how to do this I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
17th Feb 2021 6:01 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
is there anyone that followed this and was successful and can help me out please?
21st Apr 2021 12:22 pm
Johno247
Member Since: 23 Dec 2018
Location: Horley
Posts: 55
Hi all, sorry to drag this back up but I need some guidance. I have a Discovery 3 2008 (S Model). It has electric mirrors but no power fold. I bought some D4 facelift wing mirrors (as they were a bargain) and are the last mod I want to do to the car. However I am stumped even before I start.
I bought a relay (after reading this post) and went to fit it this evening. Trouble is I cannot for the life of me find the housing for it behind the glove box? See the picture below? Do all D3s have the relay housing or is it just mine that's missing one 🤷♂️
If I cannot find the housing I'll just have to fit them without powerfold. It's disappointing but I've never had them in the first place.
My second question is regarding wiring the indicator in the D4 facelift wing mirror. Do I use the indicator wire from the door repeater or will the wing mirror loom take control of that.
Thank in advance for any help and assistance. It'll keep me occupied over the Easter break.
13th Apr 2022 5:04 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1771
Is the mirror a functioning one. You could check individual functions by applying a voltage to correct pairs of wires and see if that part works. OOps only read first page
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum