OBIKNOBI
Member Since: 20 Jan 2018
Location: SCOTLAND
Posts: 30
|
front lower suspension bushes |
|
Hi Folks
As title says my n/s lower sus bush is knackered can anyone give any advice on changing these
is it a diy or garage job ?
Any advice would be appreciated.
|
14th Jun 2018 4:14 pm |
|
|
kajtzu
Member Since: 11 Aug 2017
Location: Helsinki
Posts: 6568
|
If you’re handy with tools it is possible to change the front lower control arms yourself. Bolts might be seized so you might need to saw some. If you’re unsure take it to a garage. Do a search and you’ll find a few howtos with pictures.
In any case you will need to get a four wheel alignment somewhere.
|
14th Jun 2018 4:30 pm |
|
|
Browny90
Member Since: 19 Jul 2016
Location: Ashbourne
Posts: 687
|
Look at Advanced Factors (Site Sponsor), buy the complete arms. Use code ADFLRF for 5% off.
fairly simple to replace, but you will probably fall into issues around seized bolts, to the point they need cutting out.
Need to mark where the bolts/ washers to put back in a similar place.
The when reassembled, will need 4 wheel tracking (ideally using Hunter kit)
Do a search for control arms or suspension arms, you should find some good info and photos. Disco4 MY16 SDV6 Landmark Black
Disco4 MY12 SDV6 XS Orkney Grey (Gone)
Defender 90 200tdi Completely rebuilt.
|
14th Jun 2018 4:32 pm |
|
|
|