Member Since: 08 Apr 2010
Location: Cambridge
Posts: 25
G4 Roof rack (PN: CAB500021PMA) brackets to fit to roof rail
Hi
I was given a G4 roofrack when I purchased an 55 plate D3 HSE. It does not have the brackets to attach to the roof rails (which are already on). The rails I have are also just on the higher part of the roof, not the lower, front section and pictures I have seen of the G4 roofrack look as though they are attached there as well. Can anyone point me in the right direction for the parts I have missing and advise if I need to install front roof rails?
Thanks
Andy.
9th May 2010 2:02 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Andy, unfortunately they are NOT available seperate, but somebody here had the dimensions to make some up, thats the only way I am afraid, you dont need front rails as the rack mounting points are under the rubber trim, normally a 19mm hole is required in the trim and the fixing for the rack goes over the hole
9th May 2010 2:13 pm
andyd3
Member Since: 08 Apr 2010
Location: Cambridge
Posts: 25
Thank you for the prompt reply. If anyone knows of these fixings then please drop me a line. My other thought it to buy roof bars and attach the G4 rack to these. I'd be careful with weight etc. Can anyone recommend a particularily low bar for the D3. Don't worry about replying with standard ones as I have found loads of those and don't want to waste your time.
9th May 2010 4:27 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
You may have to get some brackets made up ..sizes here
Member Since: 08 Apr 2010
Location: Cambridge
Posts: 25
Brilliant, thank you. These are the front ones only though, is this correct? For the four rear ones I have been drawing a cross section of the roof rail and trying to figure a way to attach the roof rack onto these, do you have any suggestions for this?
Again, thanks.
Andy.
10th May 2010 12:16 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Yes ..front brackets
Rears are just a flat plate that has a couple of bolts welded into ..they slide into the exsisting car roof rails .
Wil try and dig out a photo of themG4 Gone ...but not forgotten
10th May 2010 12:29 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Heres the fitting instructions ..you can see the other brackets needed
Member Since: 27 Dec 2016
Location: Rhône-alpes
Posts: 5
Hi,
Do anyone try to fix this roof rack system with extanded roof rails as on photo ?
Can it replace the Front rack bracket ?
Thanks for your experienced response !
27th Dec 2016 10:00 am
60DISCO
Member Since: 27 Oct 2016
Location: Northampton
Posts: 188
Bit on You tube about it
27th Dec 2016 10:52 am
NAN
Member Since: 27 Dec 2016
Location: Rhône-alpes
Posts: 5
Thank you disco60,
I know this video, may I explain more my question :
Do the Expedition ROOF RACK (ref: CAB500021PMA) can be fixed on top of the car with an extended roff rail kit that can replace the front brackets.
Best
27th Dec 2016 11:03 am
JonBriafield
Member Since: 10 Apr 2018
Location: Rugby
Posts: 1
The expedition roof rack can be used with the extended rails but I understand that some mods to the bracketry are required
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum