Member Since: 15 Jan 2016
Location: GL
Posts: 10355
They are difficult.
Do you have the reverse wire connected to the revering lights ?
I found I had to connect the 2 CAN wires upto the sat nav connector, and it worked much better
15th Apr 2018 8:41 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 185
Hi....i know that is late!!!
But how fit the 2 CAN wires upto the sat nav connector,?
I'm sorry
Thank's Pete
15th Apr 2018 10:18 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10355
See page 15 of the link to instructions.
15th Apr 2018 10:35 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 185
Hi...Do you think that givf from X carlink and givf from car solution IS the same thing about configuration ....I think about the DIP réglages
16th Apr 2018 9:40 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10355
probably not.
see what they are set to now, and how that matches the manual.
16th Apr 2018 12:23 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8059
Yes, if it is the same version(v.7) dip switches yes regardless of version.
The rev camera must be connected to the rear cam input, not av.1/2/3, the rev. Camera imput has priority over all other imputs.
Study the diagram below, you will see that dip switch up is on not off
Dip switch 5 6 down 7 up.
It can when others can't,
It will when others won't,
It goes where others don't.
16th Apr 2018 1:16 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 185
Hi at all...
I trie tomorrow
16th Apr 2018 10:04 pm
kineland
Member Since: 15 Jul 2014
Location: cavaillon
Posts: 185
hi.....yessss yessss it's allright...just a little electric wire no switch on 12v
the notice or xcarlinx is not the same with car solution and not enough detailed
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
