Member Since: 15 Jan 2016
Location: GL
Posts: 10363
have you measure their resistance mark ?
4th Oct 2018 12:12 pm
markagj
Member Since: 03 Dec 2015
Location: Wrexham
Posts: 175
No i haven't Pete.....as i mentioned earlier, i don't have any symptoms of them failing at the moment - so no real cause for concern, apart from them getting stuck and possibly snapping when they do begin to fail.
It would give me peace of mind to get in there, clean them up and get a smear of suitable grease on them at the moment.Discovery 4 HSE SDV6
Land Rover series 3 2.5 Petrol
4th Oct 2018 12:25 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
must be sensible to change them if they are out !
4th Oct 2018 12:48 pm
SpaceDawg
Member Since: 23 Jul 2017
Location: Sussex
Posts: 32
Update, I let them soak in oil for 8 hours then put the removal tool on them, after 1 hour they had not moved, I did use a ratchet and very carefully tried to move them, all 6 moved a little and then stuck. So back on with the air tool for a while nada.
I've re lubed them, I'll try again lunch time today, if they are still stuck then I'll get the guys in the van over to get them out. I know these plugs have not been replaced since new so I guess it likely to cost.
And if only LR made that oil separator a little smaller it would be very easy to get to the plugs and they would get changed more frequently.
5th Oct 2018 6:24 am
SpaceDawg
Member Since: 23 Jul 2017
Location: Sussex
Posts: 32
After hours of rattling then, soaking them and then trying hard to get them out, nothing. Now the drill.
8th Oct 2018 1:30 pm
SpaceDawg
Member Since: 23 Jul 2017
Location: Sussex
Posts: 32
Quick update all the plugs are now out and replaced. Nice man in a van came down and removed them on my drive way, and it cost a lot, but at least its done now.
10th Oct 2018 2:10 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
what's a lot for the benefit of others ?
More than £700 ?
10th Oct 2018 9:01 pm
SpaceDawg
Member Since: 23 Jul 2017
Location: Sussex
Posts: 32
£780, inc vat, and he did all the work inc re-assembly.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum