Member Since: 19 Dec 2008
Location: Norff Zummerzet
Posts: 1653
Headlamp Alignment. Help Required Please
Hi Gang
I had the nearside headlamp unit replaced under warranty recently. It is only now that I realise the beam needs "Lifting" a little.
HTF do you do it ?
All help, tips gratefully recieved.
Frapp
Chief numpty with a spanner
25th Jun 2009 4:09 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Headlamp Adjustment (86.40.17)
With self leveling suspension, make sure the vehicle is at the standard ride height.
The headlamp setting is 1.2 % below horizontal and parallel.
NAS vehicles have vertical adjustment only.
1 . Align the headlamp beam setting equipment to one headlamp.
2 . Switch the headlamps on and to dipped beam.
3 .Adjust the headlamps with a Philips screwdriver.
�� Rotate the adjusters A and B by an equal amount for vertical alignment.
�� Rotate the adjusters A or B for horizontal alignment.
4 . To adjust the second headlamp, repeat the above procedure.G4 Gone ...but not forgotten
25th Jun 2009 6:48 pm
Frapp
Member Since: 19 Dec 2008
Location: Norff Zummerzet
Posts: 1653
Wiggs my mate you are a star
Ill give it a go tomorrow
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
