Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Heated seats
Post Reply  Down to end
Page 1 of 1
Steve17
 


Member Since: 08 May 2016
Location: Essex
Posts: 422

England 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3
Heated seats

Good afternoon all I have a bit of a issue with my drivers seat when I put the heater on both lights come on and after a while it goes down to one light the seat base gets warm but the back is not heating up all the other heated seats work just the back rest of the drivers is faulty is there anything to check or is this a common issue thanks
  
Post #19806824th Sep 2018 3:48 pm
View user's profile Send private message View poster's gallery Reply with quote
Batfink
 


Member Since: 31 May 2017
Location: Isle of Sheppey
Posts: 1510

United Kingdom 2006 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3

First thing to check is if it has come unplugged. I don't know if they share a plug with the lower element. If not you can change each element. Don't know how much of a pain it is though.
 2006 TdV6 HSE.  
Post #19806844th Sep 2018 3:54 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8101

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

Unusual for the back element to fail, check the wiring is not damaged or unplugged.
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #19807254th Sep 2018 6:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Steve17
 


Member Since: 08 May 2016
Location: Essex
Posts: 422

England 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Can anyone please tell me the wire colour for the back rest heater element cheers
  
Post #19810425th Sep 2018 4:38 pm
View user's profile Send private message View poster's gallery Reply with quote
M3DPO
 


Member Since: 22 Sep 2010
Location: Notts.
Posts: 8101

England 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris GreyDiscovery 4

Four torque screws hold the bottom squab in place, put the seat in max height as far back as poss and take the two front ones out from underneath behind the front heel cover which pulls off with max force, then move seat as far forward and high as poss and take the back two out accessed from rear pass door under seat, might be better to do these two first as it will guide you to the location of the front two, gently lift the squab and release any cables and note how they are fixed, you can then examine all the cables and plugs. Usual problem is the cables have been caught and damaged or may have pulled the plug out from the front socket.
The heater cables (one for base one for back) enter the the seat in the centre where the drivers coxis bone is Smile ISTR they are greyish in colour and are heat resisting.
 It can when others can't,
It will when others won't,
It goes where others don't. 
 
Post #19811065th Sep 2018 7:41 pm
View user's profile Send private message View poster's gallery Reply with quote
Steve17
 


Member Since: 08 May 2016
Location: Essex
Posts: 422

England 2005 Discovery 3 TDV6 SE Manual Zambezi SilverDiscovery 3

Cheers I will have a look later I think some one has fitted a aftermarket heater element to the drivers side base Censored
  
Post #19811966th Sep 2018 5:51 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site