Member Since: 27 Feb 2017
Location: London
Posts: 183
i tried both with no luck, will try again this morning in an hour or so.
im not sure where the black wire for the DRL would go, and also another thing i noticed is that, i only connected to one side's LED strip and both worked so i didnt connect up the other side.
can anyone help with where the black wire for the DRL strip would go? is it another pin in the headlight plug?
thanks!
30th Sep 2017 11:02 am
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Pete K wrote:
sounds like an issue with the black wire to me.
At the smog sensor connector, do you guys use the black/green wire or Orange/green ?
Tried both with no luck, I'm beginning to think it's the black wire too now, anyone have any idea where this should connect? A PIN number in the headlight socket? Or anywhere else I could connect it?
Thanks
30th Sep 2017 1:18 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
I'm no expert on these, and maybe the person who sells them can help.
But as far as I know, you connect those 2 pin plugs to the LEDs
then red and black to the battery.
If the LEDs come on an stay on then it sounds like a fault.
You could try touching the ignition input to earth. This would ensure it thought the ignition was OFF.
30th Sep 2017 3:47 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
i tried messaging them but they were like send me a picture of the fault so ive given up, gonna ask for another one since i took your option and tried connecting the ignition wire ( blue) to the battery - terminal and it didnt go off either. still remains on. so until someone can give me some advice on where to get the DRL's black wire to the LED strip, i will wait for the ebay seller's response and hope they can send another one to solve the issue.
These DRL you have, don't they come with 2 wires red (positive) & Black (negative) ?
You should then connect these wires to the floating wire you got with the DRL controller (with plug on the end). This then plugs into the DRL loom for each DRL.
DRL loom - Red to battery, black to earth, and blue to an ignition source (+12v)
Well thats how mine work and they look the same as in the photo you posted. I personally have one on my D3 V8 and it works a treat.
Let me know if I can help more maybe via PM if needed.
Mark*D3 V8 SE Blue 2004 on LPG with Rock sliders, roof rack/Ladder, snorkel, 275/65x18 STT Muds, engine/G/box ally protection.
*D2 TD5 Epson Green 2002 Off roader (weekend toy)
*D3 V8 HSE silver 2004 on LPG (Wife's) SOLD
*Maserati Gran Turismo, the Gentlemans cruiser with a V8 soundtrack.
Youtube/trollmanRS
3rd Oct 2017 7:47 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Hi Mark,
thanks for the reply!
the DRL im trying to use is actually the LED strip inside the 2014+ discovery 4 facelift so im confused where the black(negative) should go. I have managed to locate where the red goes, and it powers up the LED strip fine.
please let me know of any solutions.
as for now i am planning to just get a relay and have it turn off and on through the relay using ignition input.
thanks!
4th Oct 2017 12:06 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
Arh. So its a LR LED you are trying to use?
And only connecting the red wire between the headlight and controller ?
That would explain it.
Could it be switching the negative, thus the positive side is just giving a constant feed?
CJP2017 wrote:
as for now i am planning to just get a relay and have it turn off and on through the relay using ignition input.
This is all you need - I'd just stick with it. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
4th Oct 2017 1:23 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Pete K wrote:
Arh. So its a LR LED you are trying to use?
And only connecting the red wire between the headlight and controller ?
That would explain it.
exactly! its basically the side lights in the headlight which im trying to get to turn on with the ignition. and correct only one wire between headlight and controller.
im not sure where i would connect the black wire for the LED Strip, thats the only issue
4th Oct 2017 2:38 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
Lost for Words wrote:
Could it be switching the negative, thus the positive side is just giving a constant feed?
CJP2017 wrote:
as for now i am planning to just get a relay and have it turn off and on through the relay using ignition input.
This is all you need - I'd just stick with it.
i also tried connecting the black wire for the DRL into the battery - but still nothing, so i guess if nothing else, relay it is.
everyone says that the smog connector goes off a few seconds after removing key, and comes on with unlocking the car, so hopefully that would be good, i wanted the lights to stay on for 30 mins hence i got the DRL controller but if not then i guess just having the lights come on with ignition would be ideal.
thank you !
4th Oct 2017 2:42 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
yeah just connect the DRL dirrect to the ignition.
only worry would be if they are too bright when indicating, but try it
4th Oct 2017 6:50 pm
CJP2017
Member Since: 27 Feb 2017
Location: London
Posts: 183
to be honest ive driven since the past 8 months with them on while i signal, i think theyre ok. so i went down and tried the smog connector, but it stayed on completely even after 30 seconds of locking the car. i tried fuse f9,that came on with ignition, went off after like 15 seconds. thats good stuff, but i would much more prefer it if it came on when unlocking the car also, which it currently doesnt do and i believe the smog connector does that?
does anyone know which colour wire works for them from the smog connector?
thanks!
4th Oct 2017 9:42 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10363
Pete K wrote:
sounds like an issue with the black wire to me.
At the smog sensor connector, do you guys use the black/green wire or Orange/green ?
These seam to be the options. Which one are you using ?
If this LED is inside the headlight it will use the common earth for all the bulbs, this could be your problem. I've not used the smog sensor so I can't comment on how long it is live for after ignition turn off.
However those DRL controllers I think add around 30s, mine stays on longer than that as the ignition live I have taken from my fusebox stays on at least 40-50s, so add another 30s for the controller too.
Maybe you should give it more time?*D3 V8 SE Blue 2004 on LPG with Rock sliders, roof rack/Ladder, snorkel, 275/65x18 STT Muds, engine/G/box ally protection.
*D2 TD5 Epson Green 2002 Off roader (weekend toy)
*D3 V8 HSE silver 2004 on LPG (Wife's) SOLD
*Maserati Gran Turismo, the Gentlemans cruiser with a V8 soundtrack.
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum