Carl and Petra
Member Since: 13 Feb 2015
Location: Hautes Pyrenees
Posts: 202
  
|
| Inlet manifold replacement. |
|
Hello all, i am shortly going to play with the car and replace the inlet manifolds.
I would appreciate some advice on what seals etc are worth replacing at the same time, for example, injector plug washers and o rings.
Cheers all. And cheers to tjose that post here.
|
 9th Oct 2023 7:01 pm |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
 
|
I replaced the washers as well as the two o rings on each injector its also worth getting some of the metal EGR pipe clamps - not 100% necessary but can be tricky to refit after they have been used.
If you haven't got some remote hose clamp pliers its a good idea to get some of them as they make life much easier, along with some multi angle ratchet spanners
Good Luck  Must stop buying shiny toys....
|
| 10th Oct 2023 11:35 pm |
|
|
Carl and Petra
Member Since: 13 Feb 2015
Location: Hautes Pyrenees
Posts: 202
|
Thank you for the reply Darrind, i will take your advice and buy those bits.
I hate being half way through a job thinking i should have got those bits first!
Appreciate the response.
|
| 12th Oct 2023 8:40 am |
|
|
darrind
Member Since: 04 Jul 2008
Location: In A World of My Own!
Posts: 2863
|
Good luck with it Must stop buying shiny toys....
|
| 12th Oct 2023 5:03 pm |
|
|
