Member Since: 15 Jan 2016
Land Rover button remote headlight tailgate suspension panic
I thought new users might like this.
Not the best video, but helpful.
I struggle on mine to get it programmed to the suspension. I found if LR button was previously programmed to do the headlights, it would then program to do the suspension.
The video suggested you need to start the car first.
10th Nov 2017 11:37 am
Member Since: 21 Oct 2016
know ur very knowledgeable and don’t wish to be disrespectful in any way , but did u happen to see the bit about programming the suspension ref hazards being on first , does make sense i suppose ref the video mentioning about the engine running
To set the remote to raise or lower the air suspension, turn off the engine and remove the key. Within one minute, press and hold the Land Rover button on the key fob whilst pressing the air suspension control lever on the Terrain Response area of the centre console (to either position, up or down). The suspension can then be adjusted using the remote key fob. The hazard warning lights must first be turned on and all doors closed. To raise the suspension, hold down the Land Rover button whilst pressing and holding the lock button. To lower the suspension, hold down the Land Rover button whilst pressing and holding the unlock button.MY 2005 -D3- TDV6-Java black -Auto
**** D3 - Sticker ****
T- Max Split charge system
3x indicator flash
Belts and upgraded oil pump cover
Retrofitted -Cruise control -Front electric seats- D4 steering wheel stalks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum