Member Since: 29 Aug 2008
Location: SW
Posts: 2390
Light Upgrades
I have a couple of sets of LF's to fit to my D3. I've asked TFC for the price of a loom to get it all proper. I know I have to get them turned on inside the ECU thingy. But if I get them turned on before I fit the lights will it throw a fault up? ie Does it carry out a self test everytime you turn the engine on. And then when it looks for the lights and they aren't there will it throw it's proverbial teddy out of the pram?HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
19th Mar 2009 1:40 pm
disco_doozle
Member Since: 03 Nov 2007
Location: Bree
Posts: 447
DIY.....take the high-beam directly from headlight to a relay...drop in some cabling and a switch...done.
Thats how I did it with my spots on the roofrack, simpel and clean...and not difficult to do.Disco 3 TDV6 Aut. 7 seat, Zambezi silver, Privacy glass, Rosen A9 DVD, Tow-kit, K&N airfilter, Frontrunner Windcheetah + 4xHella Comet 550, tailgate ladder, 5 breaklights , Performance BB6 17" + Duratracs 256/70R17, RLD Skid-plate, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal,
19th Mar 2009 2:57 pm
MARKW
Member Since: 29 Aug 2008
Location: SW
Posts: 2390
How did you splice into the headlight feed? Did you use a scotchlock or something more technical and nice?HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
19th Mar 2009 6:00 pm
MARKW
Member Since: 29 Aug 2008
Location: SW
Posts: 2390
Has anyone seen TFC recently? Sent an e-mail about purchasing a loom but he seems to of disappeared. Not seen him online either . Don't tell me the Oirish have kidnapped the Wiring God and won't release him HONI SOIT QUI MAL Y PENSE
They shall not grow old as those of us left grow old. Age shall not weary them, nor the years condem. At the going down of the sun, and in the morning WE WILL REMEMBER THEM
20th Mar 2009 8:34 am
kevin-t
Member Since: 12 Nov 2007
Location: sheffield
Posts: 680
TFC
Hi
He's around.
Had him up at mine in Sheffield yesturday.
What a whizz -he his found a problem, i doubt anyone else would have ever found. and sorted it
Top man. Cannot recommend highly enough.
Thanks Iain.
Kevin-T.........................................
20th Mar 2009 8:44 am
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
In Ireland Mon/Tues/Weds, Sheffield yesterday, Sussex all weekend at the Bush Craft weekend.
Member Since: 03 Nov 2007
Location: Bree
Posts: 447
MARKW wrote:
How did you splice into the headlight feed? Did you use a scotchlock or something more technical and nice?
Scotchlock.....and then tape it, just to keep water out.
Its the Bleu-gray (LH-side) or Bleu-black (RH-side)....depends on wich side you take the signal, its Pin 10.
I have put my switch over here: Easy & Fast install....no wholes in dash and also accesable while driving.
Swtich in Foot-well
Click image to enlarge
How cabling is done on my Roof Rack is seen in my gallery.
cheers
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated Disco 3 TDV6 Aut. 7 seat, Zambezi silver, Privacy glass, Rosen A9 DVD, Tow-kit, K&N airfilter, Frontrunner Windcheetah + 4xHella Comet 550, tailgate ladder, 5 breaklights , Performance BB6 17" + Duratracs 256/70R17, RLD Skid-plate, Traxide second battery setup, Lightguards, BAS EGR's blank kit, BAS Silicone hose, Black bonnet decal,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum