thorgal
Member Since: 26 Nov 2008
Location: on the east side
Posts: 541
  
|
| Lower rear door actuator access |
|
Good day to you all.Has any of you, gents,know how to remove lower gate fabric cover so I could gain access to latch actuator or subwoofer in the same area? Nothing is lacked yet but I would like to make an emergency pull proactively if that particular scenario happens in the future .Should I pull metal clips that holds ball in the socket(both sides) or unscrew the lines completely so I could take the plastic sides out along with fabric.Any output appreciated.Thanks
|
 18th Apr 2009 2:41 pm |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
release the clip and remove from the ball. I would suggest you undo the four screws that retain the plastic first then undo one side at a time and reattatch or you could undo both but the tailgate must be supported. once off the rest should be obvious.
|
| 18th Apr 2009 3:19 pm |
|
|
