Member Since: 27 Jan 2008
Location: Surrey
Posts: 143
Lower tailgate actuator melted
Hi
Both my lower tailgate actuators powered up the other evening on their own. My son noticed that there was a noise from the back of the car when he came in. After a few minutes I disconnected the battery and inspected the latches/actuators. After disconnecting the lower tailgate latches/actuators, I checked the locking and all the switches locks work fine!
I dismantled them and noticed the plastic cogs had melted.
I took the motor out and then reconnected and immediately they started up. I put a meter on them and they read 13.1v but the other central lower tailgate (which works fine) read 7.3v.
Am I right in thinking it’s the FET connector/relay thing on the CJB that’s fooked? If so, is there a work around for this or do I have to replace the CJB as the FET isn’t replaceable?
Btw, I have checked and re-soldered the ‘green splice’ cable on the passenger sil loom. Strangely enough the keyfob works fine on all the other doors, but I have to press it three times to open the drivers door...coincide?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum