Member Since: 14 Sep 2011
Location: annecy
Posts: 233
lr4 diesel oil change
where exactly is the adapter for attaching an oil extractor? I have just an oil filler cap and then a big hole. I thought there was meant to be a smaller tube inside?
thanks
4th May 2015 12:59 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The extraction tube is further forward on the same side as the oil cap, on the corner of the engine. Black vertical tube with black plastic cap.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 11 Sep 2018
Location: Royal Deeside, in a cottage on a hill
Posts: 25
Looking for recommendations...
Does anyone have a recommendation for an oil extraction pump to use on this little tube? I have looked on ebay but they all look a bit weedy* or a bit expensive... Somewhere in between would be nice...
Roger
*weedy as in taking 40 minutes to transfer the contents of the sump... This of course is what they claim and may not be achieved in real life. Oh and the unit in question has a max run time of thirty minutes...
.Disco4, Disco2, R1200R, CBX600FX, multiple Ham radios, and several bicycles...
All that lot and a tool fetish means that I seldom have more than two brass farthings to rub together.
12th Mar 2019 12:24 pm
Kelvo
Member Since: 07 Aug 2015
Location: Perth WA
Posts: 264
I bought one from Lidl, they come up occasionally. 12v and take about 10 - 15 min to fully pump out all oil (warmed !)
Cost about £13 Morris Dancers: Drinkers with A Dance Problem
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
