Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > General (D4)

Near Side rear Brakes Binding after Car being stood.
Post Reply  Down to end
Page 1 of 1
GFOS31
 


Member Since: 10 Oct 2012
Location: Nottingham
Posts: 109

United Kingdom 2013 Discovery 4 3.0 SDV6 HSE Auto BarossaDiscovery 4
Near Side rear Brakes Binding after Car being stood.

Hello, I have had my D4 for just over 3 weeks, it is a 13 plate HSE. Just yesterday I have had this grinding noise start at the rear nearside as I move off after the car has been stood for a short while. It happens in either forward or reverse and clears after traveling about 20 or 30meters. After that all is fine and no other noise is heard. Brakes all function correctly with no problems or noise. Then park up and leave for 15 minutes or more and as I move off I get the grinding noise again. It starts quite severe and then lessens until it stops. I originally thought is was a Problem with the EPB but that functions fine. And I have been parking it without applying it. Is it likely I have a sticky calliper that only binds up after being parked up. Any advise appreciated.  
Post #191354711th Feb 2018 5:47 pm
View user's profile Send private message View poster's gallery Reply with quote
Ja92mie
 


Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259

United Kingdom 2005 Discovery 3 TDV6 SE Manual Java BlackDiscovery 3

I think I currently have a sticking calliper, no noise just a hot disc and smell!  
Post #191354911th Feb 2018 5:50 pm
View user's profile Send private message View poster's gallery Reply with quote
Sloppy
 


Member Since: 17 Jul 2013
Location: North Yorkshire
Posts: 141

i had something similar, the rear caliper sliders were ceased but also there was rust on the inside of the rear disks opposite a small lip which stops dust from entering handbrake shoe area the rust was such it ha bridged and was touching the lip of metal on back plate making a strange noise.

New rear disk and pads + service of sliders all good.  
Post #191366311th Feb 2018 10:41 pm
View user's profile Send private message View poster's gallery Reply with quote
galwaygreen
 


Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525

United Kingdom 2016 Discovery 4 3.0 TDV6 Graphite LE Auto Loire BlueDiscovery 4

stone between disc and backplate  
Post #191368312th Feb 2018 12:17 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
GFOS31
 


Member Since: 10 Oct 2012
Location: Nottingham
Posts: 109

United Kingdom 2013 Discovery 4 3.0 SDV6 HSE Auto BarossaDiscovery 4

Its a really Strange one this, the grinding noise is only apparent after the Car has been sat for a short while and when first moving off, once I have done about 30m the noise clears and all is fine.
It cant be the EPB as this is not applied, I need to get he wheel off and have a good look to see what it could be.  
Post #191371712th Feb 2018 9:37 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site