johnboy3
Member Since: 24 Oct 2010
Location: northamptonshire
Posts: 190
  
|
Hi, has anybody got any ideas what this means-system fault special programs not available-the terrain response switch does not light up to which mode you are in nor does the low to high range switch light up.Resulting in cannot switch to low range or change the terrain mode.When plugged into a scanner fault codes are P1808(high range short to ground.) P1811(low rang short to ground).
Has anyone had any simuliar problems?
|
 24th Oct 2010 9:45 am |
|
|
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
 
|
Sounds the the terrain response switch pack/module has gone faulty. Have you spilled any liquids on it or had it valeted lately?
Its possible to strip the unit down and carefully clean the switch contacts although i dont think a new one is too expensive.
|
| 24th Oct 2010 10:01 am |
|
|
ELD70
Member Since: 28 Jan 2008
Location: Romford.
Posts: 901
|
Brake light bulb blown and shorting out maybe?
|
| 24th Oct 2010 10:02 am |
|
|
johnboy3
Member Since: 24 Oct 2010
Location: northamptonshire
Posts: 190
|
Hi thanks it has just had a new terrain response switch as the switch was broke off but still no low range. & brake lights Ok.
|
| 24th Oct 2010 10:08 am |
|
|
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 378
|
Possible corrosion in the TBox ECU, sat behind the battery.
|
| 24th Oct 2010 12:03 pm |
|
|
