grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6328
|
I used to panic a lot in case ofold bus but now if aint broken and moves I aint fixing
so I'd ignore it
G
|
10th Jul 2019 2:57 pm |
|
|
Footski
Member Since: 10 Jul 2019
Location: Wiltshire
Posts: 7
|
Yeah........I'm of the same opinion TBH.
Not had an older car for some years now & not used to all the knocks, rattles & wooshes this old banger makes having driven around in German motors for so long.
Would appreciate any feedback from others who can hear the noise in the vid & whether they diagnosed & sorted it and of course how much it cost them.
Just for peace of mind of course
Cheers
|
10th Jul 2019 3:04 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6328
|
hearing things aint healthy init right?
|
10th Jul 2019 3:07 pm |
|
|
Toni
Member Since: 26 Oct 2018
Location: Maidstone kent
Posts: 36
|
I have same noise on mine i belive its the clutch release bearing
|
10th Jul 2019 5:19 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6328
|
I do not believe you have clutch release bearing on AUTO box ?
|
10th Jul 2019 8:34 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1809
|
Have you checked the plastic inlets for cracks along the seam, generally there will be a bit of oil around
|
11th Jul 2019 12:01 am |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
I’ve got the same noise, sounds like a dump valve. I’ve changed all intercooler hoses and jubilee clips to t bolts. Only thing I haven’t changed is the intercooler. It doesn’t do it from cold only when the engine gets warmer . Have your egrs been blanked ? Do the egrs only start to work when the engine is at temperature Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
11th Jul 2019 9:14 am |
|
|
Toni
Member Since: 26 Oct 2018
Location: Maidstone kent
Posts: 36
|
My noise comes as i came off the accelerator and if i listened carefully i can ear it when it changes gear the noise its like a dry bearing noise goes away when off the accelerator and when under load no noise
|
11th Jul 2019 12:52 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
Sounds really stupid but tonight after work I disconnected the egr valve electrical grey plugs and my noise has stopped so even though mine are blanked off ( I don’t know how or why ) the dump valve sound has stopped Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
11th Jul 2019 8:25 pm |
|
|
SafariDave
Member Since: 19 Nov 2011
Location: NYC & LA
Posts: 775
|
I though it was the center support for the rear drive shaft. When the support rubbers are broken, the drive shaft rattles in Park or when u stop.
Dave D3 2005 V8 SE Bonatti Grey "The Rhino" (our NYC D3)
De-tangoed Headlights, D4 2016 Style Black Pack Grille, D4 19" Wheels/ Bridgestone Alenza
D3 2005 V8 SE Bonatti Grey, D4 2016 Style Black Pack Grille (our LA D3)
D2 1999 V8 SD7 Chawton White (our Caribbean Beach truck)
|
11th Jul 2019 9:14 pm |
|
|
Toni
Member Since: 26 Oct 2018
Location: Maidstone kent
Posts: 36
|
Thats got to be psychological lol if they blanked off just unplugging then plunging has made stop maybe its done some sort of reset in the icu
|
11th Jul 2019 10:28 pm |
|
|
Toni
Member Since: 26 Oct 2018
Location: Maidstone kent
Posts: 36
|
I just had my centre drive shaft mout changed it was completely busted and i just used to get a knock when pulling away hard part from that i didn't even know was broken until i looked under tbe car my self
|
11th Jul 2019 10:30 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
Don’t know I’m stumped but it’s stopped the noise when I let off the accelerator Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
11th Jul 2019 10:33 pm |
|
|
Footski
Member Since: 10 Jul 2019
Location: Wiltshire
Posts: 7
|
Dazz360 wrote:Sounds really stupid but tonight after work I disconnected the egr valve electrical grey plugs and my noise has stopped so even though mine are blanked off ( I don’t know how or why ) the dump valve sound has stopped
Sorry dude......but was yours making the same sound in the crappy YouTube video ???
I'm positive its summin mechanical with mine 55 plate Disco 3 HSE - 160k
Must be mad !!!
|
12th Jul 2019 7:33 am |
|
|
Mr Kington
Member Since: 12 Dec 2011
Location: Scottish Borders
Posts: 1552
|
Mine did that woosh noise for years. Never had a problem and didn’t affect the car in anyway. Had the TC replaced a few years back and the noise went away. Hence think it is related to the TC James favourite hobby is writing in the third person.
|
12th Jul 2019 7:52 am |
|
|