Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
buellbeast did you get the DRL finished and if so have you some more pictures please.MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
31st Dec 2011 10:20 pm
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
Hopefully finish fitting the DRL's tomorrow I got a little distracted today fitting central heating in the garage Club Forum Criminal !!!
31st Dec 2011 11:21 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
Underfloor I hope MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
31st Dec 2011 11:47 pm
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
Unfortunately not Just an old radiator i "borrowed" from the house.
Only three wires, one to each battery terminal and one to the side light feed on the back of the headlamp [orange and red on the o/s or red and black on the nearside]Club Forum Criminal !!!
Last edited by buellbeast on 1st Jan 2012 2:48 pm. Edited 2 times in total
1st Jan 2012 2:40 pm
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
Thanks Never take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
1st Jan 2012 2:41 pm
buellbeast
Member Since: 30 Jul 2008
Location: Exile
Posts: 1885
First hole cut
Click image to enlarge
Hole cut at an angle so lamp would sit level and top part scored and bent up to create a ledge to glue too.
Click image to enlarge
Mounting pins tied to bottom of bumper using small cable ties
Click image to enlarge
Ledge created earlier now filled with hot glue
Click image to enlarge
One side finished just repeat on other side
Click image to enlarge
As the LR oem ones use a cowl on the outside of the bumper the mount they use screw through the bumper and then conceals them with the cowl. I'm sure there are other ways to mount but i had glue and ties to hand Club Forum Criminal !!!
Member Since: 18 Mar 2006
Location: in the rhondda valleys
Posts: 945
noticed these led drl's are catching on with the chav's around were i live Practice safe eating - always use condiments.
2 Too many seats now
No trouble so far
tow pack, tasmods sills
IT goes without saying that you should never have more children than you have car windows
2nd Jan 2012 12:29 pm
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
Id be interested to know if you experience an increase in 'near misses' after fitting these? My wife's car has bright DRL's and I notice they are really good at disguising pedestrians and motorcyclists from other road users. I suspect we'll see a big increase in accidents when everyone has them?
2nd Jan 2012 1:15 pm
Japseroony
Member Since: 11 Feb 2008
Location: North East
Posts: 792
Here are some close up pics of the OEM lights - sorry about the dirt but she gets used as she was made to
"UNDERSTEER" ---is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" -is how fast you hit the fence.
"TORQUE" ------------is how far you take the fence with you.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I got a little distracted today fitting central heating in the garage 
Just an old radiator i "borrowed" from the house.
