Member Since: 07 Mar 2011
Location: Highlands
Posts: 1533
Oil filter also holds oil itself, so you would probably need to top
up to bring it upto level again with fresh oil.
If the oil filter needs replacing, your oil needs replacing.
I would never do one without the other.
16th Aug 2013 9:14 am
KamerunD3
Member Since: 16 Aug 2013
Location: Yaoundé, Cameroon
Posts: 23
Thanks a lot for the fast reply. The Oil is brand new (6 days / ca. 500 km). My lovely Dealer in Cameroon just fitted the wrong filter inside. It seems, that the filter is a bit to small, because it's "ratteling". It was the 1st time I wasn't with the repair. So they probably took a cheap one from somewhere else. That's why I just want to replace the filter with an original one.
16th Aug 2013 10:51 am
Hess
Member Since: 07 Mar 2011
Location: Highlands
Posts: 1533
I would request that the dealer fixed it, free of charge.
16th Aug 2013 11:11 am
KamerunD3
Member Since: 16 Aug 2013
Location: Yaoundé, Cameroon
Posts: 23
Cameroon and free of charge won't fit into one sentence
I'm hoping that this will solve the problem and my Disco will stop ratteling. Thanks for all the help. I will probabely need it quite a lot in the future.
16th Aug 2013 12:23 pm
Macan
Member Since: 31 Mar 2014
Location: Exeter
Posts: 1
Really useful post. Many thanks.
21st Apr 2014 10:17 pm
SWR
Member Since: 07 Nov 2013
Location: Warwickshire
Posts: 840
Possibly another silly question.
Is it best to run the engine first to warm the oil up to allow it flow better, or does it make no difference?
Thanks
SimonD3 HSE TDV6 Auto. Bonatti Grey.
Mods:
V8 Brake upgrade (front Only), Full height Luggage guard, Rubber mats all round, RLD spare wheel protector, Terra Firma Steering and Transmission guard, Smoooooth Nappa steering wheel, Clock on dash and Reverse home lights. National Luna split charge system, front and rear light guards, Danhag GSM (on loan), JE stage 1 remap... Zero money
8th Jul 2014 12:24 am
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
I'd always warm engine first as the viscosity of the oil is less when warm and it will flow better but you need a glove on to pull the sump plug
8th Jul 2014 6:11 am
simisteven
Member Since: 20 Dec 2014
Location: Pennington KZN
Posts: 51
oil change TDV6SE
Great post Matt, and helpful posts from others. If you have submitted any such similar posts pse send me link
21st Dec 2014 8:58 am
Ollram
Member Since: 04 Dec 2006
Location: Gortynia
Posts: 605
Hi to all
Went to my indie today to change the oil & filter.
6 lt of castrol edge 5/30 used ( as always) and britpart filter.
Ive noticed that when i start the engine the red oil indicator remains for a second or two, giving the warning noise, then disappears and all is ok. Is this nornal?? Oil change has been done before 50 miles, oil indicator shows normal oil level.
Ive done over 10 oil changes during the last 7 years...its the first time that this happens..
Cheers
24th Dec 2014 2:23 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20726
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
It does take a few seconds for oil pressure to build particular on old oil pump.
saying that if you've never seen the Light before I'd be a bit wary that the filter hasn't quite been put on straight and restricting flow a little
Can you check filter yourself or get indie to look?
24th Dec 2014 3:36 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Disco_Mikey wrote:
Bin the Britpart filter, and quickly!
^^^^^ this!!!Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 01 Sep 2014
Location: Bury St Edmunds
Posts: 212
Oil change
Thanks to all contributors. really useful to have photos to hand when doing these little jobs.
DerryJoined Aug 2014. Disco 3 SE 54plate, Buckingham Blue, Cream leather.
Defender 90 200Tdi (weekend toy)
TinTent - Coachman Pastiche 535/4
Supercharged Autobiography Grille
Tera-Firma black silicone intercooler/turbo hoses fitted Sep2014
Forum stickers, silver on rear, Orange in place of RFL disc
24th Dec 2014 10:59 pm
Assich
Member Since: 26 Mar 2015
Location: Inverness
Posts: 2
I read that there is supposed to be a black plastic tube in the middle of the filter but I didn't see any when I took the top screw on housing off? If so can you buy a replacement?
26th Mar 2015 10:31 pm
doodahoops
Member Since: 09 Mar 2015
Location: Dorset
Posts: 117
Got down to do the change this afternoon. Two bolts rounded off with no effort and another spinning, two more missing.
Have searched for replacement 13mm bolts but can't locate them. Any ideas or is it a call to AF first thing Monday morning with a description.
Trip to the garage to get the plate removed. At least next time it will be easy.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
