Big T
Member Since: 14 Oct 2007
Location: Peebles
Posts: 12
|
Anone know where the canister type oil filter is on a Disco 3 (2005 HSE)?
Is it behind a panel & if so where's the panel?
Cheers
Tom Cheers
Big T
|
21st Feb 2009 1:29 pm |
|
|
scotty4rt
Member Since: 23 Apr 2007
Location: Tyne & Wear
Posts: 2
|
Howdy,
Oil filter element - remove the engine bay cover, no bolts just push fit clips, but you do need to remove oil filler cap first. Behind this cover revels the oil filter cartridge cove dead centre 32 mm plaste nut. It has a three symbols marked on it. Gentle remove this, make sure that on removeal you do not expose it to dusty elements.
Within the now removed plastic cartrige cove lies the element. Remove with a firm pull.
Replace new oil element in to the engine, locating the niple correctly befor replacing the cover. be carefull not to over tighten.
I now on the scout for the Fuel filter!
Good luck!
|
21st Feb 2009 2:26 pm |
|
|
Big T
Member Since: 14 Oct 2007
Location: Peebles
Posts: 12
|
Thanks Scotty - I found it after trial & error |
|
Thanks Scotty - I found it after trial & error Cheers
Big T
|
21st Feb 2009 3:30 pm |
|
|
|