Hot Tub
Member Since: 15 Aug 2017
Location: Milton Keynes
Posts: 1071
|
I have had a problem with the top rear hatch not shutting properly need a FIRM push! The lower part had a bit of movement when shut if pushed. I removed the cover from the pins which it catches on marked where it was then slackened of the two 8mm bolts need 13mm socket the top bolt slackened more than bottom so it pivots moved top about 1mm towards front of the car. Tighten both bolts then repeat on the other side. Leave covers off then try closing both to see if better adjust if necessary.
Hoping this makes sense please let me know if not. I am known for writing things only I understand
Still can't add pictures sorry gave up trying
|
7th Jan 2018 2:40 pm |
|
|