Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
Registration plate plinths
Over the weekend, three vehicles 'suffered' from detached or partially detached registration plates. Apart from the one that was screwed to the soft A bar , and one on a RRS that was only taped on, one didn't have the plinth fitted, which I thought was a standard item. Looking at some of the other vehicles it seems a bit hit-and-miss.
Behind the reg. plate is the two mountings for the plinth and the plinth itself has multiple mounting holes to accomodate reg. plates.... so who does and who doesn't?
seems silly not to fit them to me as a bit of water (or mud) easily popped the plates off
20th Mar 2006 5:23 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
I have one, but how do you loose one on Salisbury Plain??DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
Not had one on either of mine, probably Stra...........skimping!Zermatt silver 06 reg.
Gone but not forgotten !!!
20th Mar 2006 5:27 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
Pelyma wrote:
I have one, but how do you loose one on Salisbury Plain??
Going through water.In the Beginning there was nothing, which exploded.
20th Mar 2006 5:31 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
Ahhh playing submarines!DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
20th Mar 2006 5:35 pm
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
Had one but now mine comes off as its attached with two 1/4 turn screws (Winch) prior to off road use
20th Mar 2006 5:57 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
of course I have one! ( had to go out and check though! ) and theeeeennn......???
20th Mar 2006 6:03 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I have one too.
20th Mar 2006 6:12 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Apparently...
Vin range: 6A355628 Onwards
The front bumper European registration/license plate plinth will not be installed on vehicles built from the above VIN. Only vehicles destined for markets where it is a legal requirement or have identified a specific need will continue to receive the front bumper European license plate plinth. Specific markets will receive a different license plate plinth while others will receive no license plate plinth. Markets with no plinth should secure the license plate directly to the front bumper.
So not sure if its a legal requirement in the UK but this may explain some not having one.
Mine has.
-s
20th Mar 2006 6:25 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
So my new car won't have a plinth, FBH control, parking ticket clips and mud flaps, anything else they want to nick off it. It'll look like little 5 has been near it DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
Mine did have a plinth before the winch was fitted and large chunks of the front bumper were removed, plinth is sitting in my shed, free to a good home if anyone wants it
20th Mar 2006 6:52 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
Can I take you up on that offer?DS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
Member Since: 10 Jan 2006
Location: SW London
Posts: 54
My car is 6A3643xx and didn't come with one fitted so I bought one from the parts department - approx £4...bargain!!2006 TDV6 SE
Buckingham Blue/Alpaca
Privacy Glass
Adaptive Xenons
19 Inch Alloys
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
, and one on a RRS that was only taped on, one didn't have the plinth fitted, which I thought was a standard item. Looking at some of the other vehicles it seems a bit hit-and-miss.
