Member Since: 12 Mar 2013
Location: London
Posts: 120
How to remove wheel arch trim on disco 4
How do I remove the wheel arch trim on Disco 4?
I note from a disco 3 video that you need to remove front grill and headlight, but the disco 4 wheel arch trim seems to be different, so any pointers would be much appreciated.
thanks in advance,
R.
7th Mar 2016 12:54 pm
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
IIRC there is a nut/screw inside behind the headlight so yes grill and headlight off to access
7th Mar 2016 1:49 pm
Rich_S
Member Since: 12 Mar 2013
Location: London
Posts: 120
OK, excellent! Will have a look see and hope that I don't get stuck!! Many thanks.
7th Mar 2016 1:51 pm
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
The trickiest part I found was pulling up the release pins for the headlights! Don't think they had been used for a while. Ended up using some strong thin rope, made a loop and gave it a good pull
7th Mar 2016 1:54 pm
Rich_S
Member Since: 12 Mar 2013
Location: London
Posts: 120
just a little wary of breaking anything!!
7th Mar 2016 1:56 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1809
On from Nick's advice - i used the claw of my hammer to prise the headlamp release pin up
Below is a decent guide for removing grill / headlights etc:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
