Member Since: 04 Jan 2010
Location: shropshire
Posts: 106
Removing the front cigarette mouning panel.
Trying to remove the front cigarette and ash tray mounting, have removed the 2 securing screws and pulled it free from its mounting clips, but it still seems to be attached somewhere as it won't come out any further that about 15mm, am I missing something?
Any points would be appreciated.
20th Jan 2010 10:42 am
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
I think from memory there are two clips at the back? You may also need to remove the plastic section below it? You must have the radio surround off I assume to get the screws out?
There is a good post with pictures on the forum, try search...
20th Jan 2010 1:06 pm
sticks348
Member Since: 04 Jan 2010
Location: shropshire
Posts: 106
Yes screws removed and clips pulled free, just can't tell if the bottom section needs to be removed, it actually feels like there is still something attached?
Yes tried the search but got nothing, will try again.
Update finally found something with a pic which answers my question thanks anyway
20th Jan 2010 4:14 pm
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
Sorry, trying to remember how I got mine out. Does this pic from Wiggs gallery help:
You have to get that back clip out too you see, but its just the clips that hold it in once the bolts are out as far as I can remember...
I have a great thread bookmarked... on my home PC sorry!
20th Jan 2010 4:25 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
you need to remove the part underneath it ...and to get that out you have to remove the top of the center consulG4 Gone ...but not forgotten
20th Jan 2010 4:46 pm
BHH
Member Since: 19 Jan 2010
Location: Co. Antrim, N. Ireland
Posts: 208
Anyone got any pics of whats behind this? I'm planning to drill a hole top left hand corner of the photo above to route a USB lead from a Brodit Phone Holder - then run through the dash to the fuses at passengers feet - any help would be appreciated - Brian
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
